Introduction: Knex Rock Crawler

Picture of Knex Rock Crawler

I was finally given the OK to make this instructable by Knexwiz. I have not made a body out of knex for it yet but If you do please tell me and share it with me. I love mods. lol, also I know that not a lot of people are going to have springs so try the orange flexy rods. I haven't tried those yet but they might work.

Step 1: Frame

Picture of Frame

This is the frame of the truck.

Step 2: Suspension

Picture of Suspension

This is the suspension for the truck.

Step 3: Suspension to Frame Connection

Picture of Suspension to Frame Connection

Here is how to connect the suspension to the frame.

Step 4: Finished

Picture of Finished

So yeah thats it. Remember to comment and rate and also share your mods with me. Thanks

~LF

Comments

AnkitK8 (author)2015-04-07

can u give me the report of this project?..mail me plzz

ShaunC1 (author)2014-08-15

soooo...how does it go???

the knex guru (author)2012-07-26

nice iam making a offroad crawler/buggy with suspension and 4wd reply if you want instrutions

sammyrs2000 (author)2012-04-29

where are the tires from

Flatout Knex (author)2011-01-08

my version

GTRPLR1995 (author)Flatout Knex 2011-01-10

cool

Knexwiz (author)2010-06-26

i really likes they way you put it together. it made it so much simpler to teh way i originally built it lol.

GTRPLR1995 (author)Knexwiz2010-06-27

Thanks, Now if only I could figure out how to build a nice body for it.

Knexwiz (author)GTRPLR19952010-06-30

i cracked my toyota body, so im also looking to build something for it, but its hard the way that i desgined the chassis haha

GTRPLR1995 (author)Knexwiz2010-06-30

Yeah no kidding. lol

Knexwiz (author)GTRPLR19952010-11-20

i finally built a knex body for that chassis. although its not the exact same chassis its pretty much the same, check out my newest slideshow to check it out.

GTRPLR1995 (author)Knexwiz2010-11-20

K

Knexwiz (author)2010-11-20

Did you take the springs from the avalanche rc truck? cause i got my springs from my toyota rc chassis so im kinda curious :P

GTRPLR1995 (author)Knexwiz2010-11-20

Naw, I got it a grave digger rc. XD

Knexwiz (author)2010-07-18

Where did you get the avalanche body?? I fixed the toyota body, and it's got new paint. It's got a flat black and silver two tone. And now the wheels are flat black with green rings. I'll post pics when I get a chance.

GTRPLR1995 (author)Knexwiz2010-07-20

I got it off a radio shack rc truck.

knex vehicle builder 00 (author)2010-06-11

dude thats cool

thanks, but you better go tell knexwiz that too.

~Aeronous~ (author)2010-06-10

Ehpikal. Ehpikally Ehpikly Ehpik. You probably should have made the frame before you posted mind.

GTRPLR1995 (author)~Aeronous~2010-06-10

Yeah well its not mine, Its knexwiz's and he only had an rc car body layin around so he used it. But your more than welcome to make one yourself and post it.

~Aeronous~ (author)GTRPLR19952010-06-10

Okay. I might once I clear things up. I'm very busy.

GTRPLR1995 (author)~Aeronous~2010-06-11

Ok, also, you just made my 600th comment, OH YEAH!!!

~Aeronous~ (author)GTRPLR19952010-06-12

Oh yeah? Try and beat my 1437th comment= This one. Hmmm?

GTRPLR1995 (author)~Aeronous~2010-06-12

UH...UH...UH...I got nothing.

~Aeronous~ (author)GTRPLR19952010-06-13

No, you don't. kNeXfReek has racked up 5500 and something, and the DJ has racked up 7500.

GTRPLR1995 (author)~Aeronous~2010-06-13

WOW, thats a lot of comments.

~Aeronous~ (author)GTRPLR19952010-06-13

Well, I kinda jumped from 400 to 900 in 2 weeks, because I was commenting so much, and getting approx 40 comments a day. In the end I ran away from ibles for 2 weeks.

GTRPLR1995 (author)~Aeronous~2010-06-14

OHHHHHH

~KGB~ (author)2010-06-10

look duarable!

GTRPLR1995 (author)~KGB~2010-06-10

Its very duarable.

~KGB~ (author)GTRPLR19952010-06-10

kool

GTRPLR1995 (author)~KGB~2010-06-10

thanks

~KGB~ (author)GTRPLR19952010-06-11

np

knexsuperbuilderfreak (author)2010-06-09

very simple degin but looks strong enogh

It is. It has not broke yet and it holds together very well.

About This Instructable

3,445views

6favorites

License:

Bio: Formerly was "Legofanatic". It's been a while since I have been on here but I'm thinking about making a come back. Maybe some ... More »
More by GTRPLR1995:Knex M41-A from the movie "Aliens"Knex 8 shot RevolverDouble TR-18
Add instructable to: