Introduction: Knex SOBR-922 Prototype

I present to you a new Battle Rifle that I thought of making. It has a new mag type that ive never used. It is a...... READ THE STATS!


Pros:
Very Powerful
Good range 30-45 ft
Internally pushed mag
Not a standard repeater (uses a bolt)
Far block back


Cons:
Somewhat unrelaible
Mag is funky
Only holds 9 shots


Oh, for those who I told there would be a Barrett, that project got cancelled.

Comments

author
ryry2011 made it! (author)2011-08-27

well not to be offensive but it seems a little sloppy.

author
Millawi Legend made it! (author)Millawi Legend2011-09-03

Coming from you?

author
beanieostrich made it! (author)beanieostrich2011-08-27

Thank you?

author
ryry2011 made it! (author)ryry20112011-08-27

hay are you going to get with a hurricane in about 8:00 hrs? i am

author
beanieostrich made it! (author)beanieostrich2011-08-27

Yes, I am going to get a hurricane lol. I live in Pennsylvania.

author
ryry2011 made it! (author)ryry20112011-08-27

yah i live in new york

author
beanieostrich made it! (author)beanieostrich2011-08-28

York, Pennsylvania got like nothing other than like 4 inches of rain and a little wind lol. What did Elmira get?

author
ryry2011 made it! (author)ryry20112011-08-28

it is not past us yet .but we got rain and huge gust of wind

author
beanieostrich made it! (author)beanieostrich2011-08-28

Intresting, theres probably a lot of power outages.

author
ryry2011 made it! (author)ryry20112011-08-28

not yet. but in three states over 4,000,000 people without power

author
beanieostrich made it! (author)beanieostrich2011-08-28

Thats actually quite a bit of people lol.

author
ryry2011 made it! (author)ryry20112011-08-28

yah just a little

author
KnexFreak360 made it! (author)2011-08-31

Sick gun i really like the overall design of it!

author
beanieostrich made it! (author)beanieostrich2011-08-31

Cheers. I dont really know how to say that this is my favorite gun without bragging lol.

author
KnexFreak360 made it! (author)KnexFreak3602011-08-31

LOL!

author
TheFoofinator made it! (author)2011-08-25

I like this. Try using connector ammo for improved performance. I see you used the Zaktangle's mag design. A very reliable yellow rod mag.

author
beanieostrich made it! (author)beanieostrich2011-08-25

Cheers. =D My mag is slightly different than Zak's, different pusher and it uses broken orange connectors instead of the gray connectors. Zak's mag was a little too unreliable for my liking. And my mag's pusher is also completely internal, no bands sticking out the sides, just one flexi-rod as the pusher.

author
TheFoofinator made it! (author)TheFoofinator2011-08-26

My only nag is the fact that it is taped but that is just me being a purist

author
beanieostrich made it! (author)beanieostrich2011-08-28

Yea the mag would only stay together if I used tape. This gun is surprisingly unreliable, as the mags are still a little funky. But the priming handle problem is fixed.

author
TheAwesomestDude made it! (author)2011-08-25

looks neat

author
beanieostrich made it! (author)beanieostrich2011-08-25

Cheers. =D And not to brag but this is my favorite Battle Rifle.

author
TheAwesomestDude made it! (author)TheAwesomestDude2011-08-25

lol=D it is pretty awesome

author
beanieostrich made it! (author)2011-08-24

Cheers. =D Glad to hear that.

author
superbestknex made it! (author)superbestknex2011-08-24

make instructions

author
beanieostrich made it! (author)beanieostrich2011-08-25

I would make instructions if the mag did not need 2 specially, vital orange pieces. But im glad you like the gun.

author
superbestknex made it! (author)superbestknex2011-08-25

what are the orange peices i might have them

author
beanieostrich made it! (author)beanieostrich2011-08-25

The two way orange connector, ill take a picture of what they are supposed to look like when modded sometime.

author
superbestknex made it! (author)superbestknex2011-08-25

thanks cant wait to see picture could you make instructions for the mag and mech of this gun

author
dr. richtofen made it! (author)2011-08-23

cool, but what do you mean with '' mag is funky'' ?

author
beanieostrich made it! (author)beanieostrich2011-08-23

Cheers. The mag just acted very weird until I modded a couple orange connectors, and now it does not try to shoot 2 at once like the old one.

author
dr. richtofen made it! (author)dr. richtofen2011-08-23

ok, is it bolt action like the zkar or is that just an thing you pull to cock the gun?

author
beanieostrich made it! (author)beanieostrich2011-08-24

It works similar to the ZKAR's bolt action.

author
dr. richtofen made it! (author)dr. richtofen2011-08-24

ok, thats cool!

author
War Hawk One made it! (author)2011-08-23

he great gun I know you had a barrett in mind because you told me but you can see it at the stock and handle. great job

author
beanieostrich made it! (author)beanieostrich2011-08-24

Cheers. =D The original gun was going to be a Barrett, but it got too complicated after the receiver lol. So I just made a removable mag Battle Rifle.

author
apples!!!!! made it! (author)2011-08-23

That's not really a bolt ._.

author
beanieostrich made it! (author)beanieostrich2011-08-23

I could not really think of a name for it. And how does the gun look?

author
apples!!!!! made it! (author)apples!!!!!2011-08-23

Lol okay, it's just that there are numerous people who stick something on the ram and are all like "lol bolt action lol" so it gets a tad annoying :P and well, it looks sturdy and like it functions well, at least. It doesn't look like anything new though, honestly.

author
beanieostrich made it! (author)beanieostrich2011-08-23

I know, and I can agree that its not all that new. The only selling point of this gun really is the internally pushed mag; and relatively far block back of over 6 inches. And what would you call that "bolt" thing that cocks the pin back?

author
apples!!!!! made it! (author)apples!!!!!2011-08-24

Lol I guess, though those have been around for a while :P lol it really isn't anything, it's just...a pull thing. Maybe a priming handle? It....I don't know. lol

author
beanieostrich made it! (author)beanieostrich2011-08-24

Ill call it a priming handle then lol.

author
MegaMetal8 made it! (author)2011-08-23

getting better as a builder. I LIKE

author
beanieostrich made it! (author)beanieostrich2011-08-23

Cheers man. I just felt like trying internally pushed mags on a Battle rifle. =)

author
MegaMetal8 made it! (author)MegaMetal82011-08-23

I can tell you got the frame from a barret, (mag & stock)

author
beanieostrich made it! (author)beanieostrich2011-08-23

Yes, I did use a Barrett as an inspiration. It was supposed to be a barrett originally but I gave up after realizing that I could bot make a fake barrel, and the type of mag would not angle.

author
MegaMetal8 made it! (author)MegaMetal82011-08-24

Yeh, OK

author
Vaetheon made it! (author)2011-08-22

aw. no Barret, but still, this looks like a good gun. =)

author
beanieostrich made it! (author)beanieostrich2011-08-22

Cheers. =D The fake barrel got too hard to make lol, so I just gave up on it and made a Battle Rifle out of what I had lol.

author
Vaetheon made it! (author)Vaetheon2011-08-22

thats ok =D

author
beanieostrich made it! (author)beanieostrich2011-08-22

Well all I have to do is somehow make this gun more reliable.

About This Instructable

637views

0favorites

License:

Bio: Hi. I've sold off about 99% of my k'nex, but I still come here to check in on instructables, every 2 weeks or ... More »
More by beanieostrich:Failed Knex Gun Concept - CQB Assault RifleKnex SSCR IVKnex TZKAR-18
Add instructable to: