Instructables
Picture of Knex SP-51 Desert Eagle Mk2 (How to build)
Ok, I have gotten many requests on instructions and here they are. Be prepared for some blurry pics, but not all of them are blurry.
 
Remove these adsRemove these ads by Signing Up

Step 1: The front of the barrel

Pretty simple follow the pics.

Step 2: Trigger / More barrel

Again follow pics to the best of your ability. 

***PIECE WARNING*** A broken white rod is needed for the trigger to work.

Step 3: Handle + how to attach it

same as last, but no broken pieces needed this time.

Step 4: Back of the gun + Firing pin and band placement

same as last =D

Step 5: YAY YOU HAVE FINISHED THE GUN XD

Picture of YAY YOU HAVE FINISHED THE GUN XD
You earn a nice pat on the back for completing this gun XD 
awww i dont like cutting perfectly good peices :( but oh well its for a sweet gun
beanieostrich (author)  knexmaster123 years ago
I know =D Wire cutters work the best. They make mince-meat out of knex rods XD
so did my dads saw :P
beanieostrich (author)  kingofknex3 years ago
Thats obvious lol. Saws actually cut stuff; as wire cutters are just a very heavy duty pair of scissors I think.
Prism Thief3 years ago
Can the blue hinge be replaced by a ball joint piece?
beanieostrich (author)  Prism Thief3 years ago
Possibly =D
atomic_ben3 years ago
nooooooooooo i dont have one of those blue hinge pieces!!!!!!!!!!!!!!!!!
beanieostrich (author)  atomic_ben3 years ago
Thats not good D:
Boasz3 years ago
the trigger breaks off if you wat to fire it any tips?
beanieostrich (author)  Boasz3 years ago
I honestly dont know what to say man. Im sorry =(
this part breaks off if i pull the trigger.
naamloos.GIF
beanieostrich (author)  Boasz3 years ago
Oh, thanks for providing a pic. You dont really need the Y connector in the middle.