Instructables

K'nex Shotgun (Instructions)

Picture of K'nex Shotgun (Instructions)
This is the instructable for my K'nex shotgun. I would recomend that you should build it, because it is a decent shotgun. Please rate, comment, and subscribe.
 
Remove these adsRemove these ads by Signing Up

Step 1: The main body

Here you will make the body of the gun.

Image 1 : Build these panels.
Image 2 : This is another view of the trigger mechanism.
Image 3 : Here is yet another view of the trigger mech.
Image 4 : Attach the other panel from image 1 to the stuff you just built.
Image 5 : Build these pieces.
Image 6 : Take the pieces you just built and put them in the places shown.

You are done with the body. Go on to the next step.

Step 2: The bolt

Here you will make the bolt and some other small things.

Image 1 : Build all these pieces.
Image 2 : Put on the pieces you just made like so.
Image 3 : Here is the other side of the bolt.
Image 4 : Take the other piece from image 1 and put it on the end of the gun after you put the bolt in.
Image 5 : This is the firing pin. Put tape on it to strengthen it.
Image 6 : Put the firing pin in the gun like so.


Step 3: You're Done!

Picture of You're Done!
Have fun with this gun, and be sure to subscribe.

Step 4: Who has made it.

Picture of Who has made it.
This is the vengeful aug's gun: