Print PDF
Favorite
Email
Step 2Barrel and Hopper.
THis will tell you how to make the barrel and hopper for the gun.
Pic 1: Make.
Pic 2: Just there to help you make pic 1.
Pic 3: Make. ( Not Hard )
Pic 4: Other side of Pic 4.
Pic 5: Attach as seen in the Picture.
Pic 6: (Yes I know I forgot to add this before the Hopper).
Pic 7: Again there to help you make Pic 6.
Pic 8: That part is crucial.
Pic 9: Connect Pic 6 to Pic 1.
Pic 10: It should look like That.
Your done with this section. :)
Pic 1: Make.
Pic 2: Just there to help you make pic 1.
Pic 3: Make. ( Not Hard )
Pic 4: Other side of Pic 4.
Pic 5: Attach as seen in the Picture.
Pic 6: (Yes I know I forgot to add this before the Hopper).
Pic 7: Again there to help you make Pic 6.
Pic 8: That part is crucial.
Pic 9: Connect Pic 6 to Pic 1.
Pic 10: It should look like That.
Your done with this section. :)
| « Previous Step | Download PDFView All Steps | Next Step » |
9
comments
|
Add Comment
|
Aug 7, 2011. 6:43 AMVINNIE SIFT
says:
w8 use ball sockets from a knex man
Reply
Aug 7, 2011. 6:41 AMVINNIE SIFT
says:
is it ok if i use tan clips
Reply
May 10, 2009. 11:54 AMtytyjul97
says:
you do not need to mod unless u want the ato load
Reply
3
Sep 29, 2009. 5:51 PMFurloy
says:
you can have auto load with no peice mods use tan clips, works great.
Reply
Dec 27, 2008. 1:24 AMcalburger
says:
how u cut lol
Reply
3
Jun 23, 2009. 11:26 PMgeodez
says:
bite it off.
Reply
1
Jan 25, 2009. 12:15 PMDrWeird117
says:
Wire cutters.
Reply
Dec 27, 2008. 1:18 AMcalburger
says:
do u have to modify the pieces?
Reply
11
Mar 28, 2009. 7:35 AMTwistedParadox
says:
no
Reply
3
Feb 7, 2009. 8:39 AMhappybirthday
says:
yes
Reply
3
Oct 25, 2009. 12:28 PMFurloy
says:
no use tan clips
Reply
 |
Add Comment
|
