Print PDF
Favorite
Email
Step 3Firing Pin and Pump
This part shows you how to make The pump and firing pin.
Pic 1 and 2: Make.(Same thing)
Pic 3: Add 2 grey rods with 3 blue spacers.(Grey rods are the guides.)
Pic 4 and 5: Make.(Same Thing)
Pic 6: Put Pump on like so.
Pic 7:How to attach it to barrel.
Pic 1 and 2: Make.(Same thing)
Pic 3: Add 2 grey rods with 3 blue spacers.(Grey rods are the guides.)
Pic 4 and 5: Make.(Same Thing)
Pic 6: Put Pump on like so.
Pic 7:How to attach it to barrel.
| « Previous Step | Download PDFView All Steps | Next Step » |
3
comments
|
Add Comment
|
Jul 16, 2010. 7:14 AMterminatorfan
says:
is that white rod needed on picture 2?
Reply
Apr 7, 2008. 10:13 AMllannderr
says:
What is pic 4/5 ? Is it a part that exists in k'nex or did you make it yourself?
Reply
2
Apr 8, 2008. 8:15 AMFresh94 (author)
says:
It is a Clear/Black rod with a green connector and the end and a tan clip wrapped in tape with a grey one connector next to it.
Reply
 |
Add Comment
|
