Print PDF
Favorite
Email
Step 5Attaching it all together and Rubber Band Placement.
OK this is the easy part.
Pic 1: Attaching the Trigger.
Pic 2: Slide it in there.
Pic 3: Slide the other half and connect the two.
Pic 4: It should look like that. NOw you need a Blue rod.
Pic 5: A little blurry but insert it like so.(Make sure it clicks)
Pic 6 and 7: Attach barrel, pump, firing pin, and guide like so.
Pic 8 and 9: Attach stock.
Pic 10: Attach rubber band for trigger here.
Pic 11 and 12: Pump rubber band goes here.
Pic 13:
Pic 1: Attaching the Trigger.
Pic 2: Slide it in there.
Pic 3: Slide the other half and connect the two.
Pic 4: It should look like that. NOw you need a Blue rod.
Pic 5: A little blurry but insert it like so.(Make sure it clicks)
Pic 6 and 7: Attach barrel, pump, firing pin, and guide like so.
Pic 8 and 9: Attach stock.
Pic 10: Attach rubber band for trigger here.
Pic 11 and 12: Pump rubber band goes here.
Pic 13:
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
16
Jan 30, 2010. 6:55 AMAcepilot42
says:
clever
Reply
 |
Add Comment
|
