Introduction: Knex Slingshot

Picture of Knex Slingshot

Hi! Today I'm going to show you how to make a slingshot! Its very simple, you just need about 8 inches of elastic. So, let's build!

Step 1: Step 1 Make the "V" Thing

Picture of Step 1 Make the "V" Thing

Make sure to tie a tight knot of elastic around the green rod in the middle.

Step 2: Making the Handle

Picture of Making the Handle

I reccomend using three tan rods for strength.

Step 3: Making the Stone

Picture of Making the Stone

So easy I'll make a parts list.
Small wheel: 2
Green rod:1

Step 4: Step 3 Assemly

Picture of Step 3 Assemly

Just connect the tan rods to the blue connecters.

Step 5: FINISHED!!!!!!

Picture of FINISHED!!!!!!

FINISHED!!!!!! Now you can make targets and shoot them down! HOORAY!!!


daredevil499 (author)2012-12-10

is it strong?

Not so strong. the handle easily falls off, but you could put your thumb between the blue connectors. XD

I built it

sandroknexmaster (author)2012-11-28

Nice idee to make the bullets with small wheels and a green rod.


knexinventions 49 (author)2012-11-28

You can also put a blue spacer in between the wheels.

About This Instructable




Bio: Hi! I'm knexinventions 49, a kid who loves to build, program, inspect element, play, and more. As my username suggests, most of my 'ibles ... More »
More by knexinventions 49:3D Building Papercraft With Grid Paper!!Knex Candy Machine Module3D Buildings on grid paper!
Add instructable to: