loading
Hello and thank you for coming to my instructable. Here are some features of my k'nex gun.

Features:

True trigger

A hopper (most reliable as single shot).

Pin guide

Comfortable handle

According to you guys, good looks.

Great power.

Step 1: Step 1: the Frames of the Gun

Here you will build the walls of the knex rifle.

Step 2: Step 2: Firing Bolt and the Bolt Guide

In this step you will be making the firing bolt and the firing bolt guide.

Step 3: Step 3: the Trigger Mechagnism

In this step you will be making the trigger mechagnism.

Step 4: Step 3: the Hopper

In this step, you will be making the hopper. It is most reliable as a single shot. A single shot is where you load it, shoot it, load it, and repeat the process).

Step 5: Step 5: Attatching the Other Frame

Attatch the other frame.

Step 6: Step 6: Rubberband Placement

These pictures will show you where to place the bands.

Step 7: Step 7: Loading and Firing

To load, pull the bolt back until you hear the trigger click. If it does not shoot, you have pulled the bolt back too far. Next, load ONE blue rod into the hopper and check to make sure the bullet is all the way down.

Step 8: Step 8: Credits

Thank you for building my knex rifle. Please comment, rate, and subscribe. Thank you so much and have a wonderful day.
how many green rods does this use. <br>
I am sorry for the late response, but if I would have to take an educated guess, I think it would be around 180-200.
ok could i use less and still buildit <br>
I wish you luck, thank you.
koolm pice too dark tho
Thank you. I appreciate your criticism.
no problem! =D
sweet gun man<br>
Thank you very much. Your opinion is greatly appreciated.
no thank u for building this gun<br>

About This Instructable

583views

0favorites

License:

More by Knex-Smart-Person:Knex-Smart-Person's New Knex Gun New Kne'x Gun K'nex-Smart-Person's k'nex rifle 
Add instructable to: