Introduction: Knex Steyr Aug [Update 3]

Picture of Knex Steyr Aug [Update 3]

A knex Aug I made, hope you guys like, and enjoy =)

P.S Please Comment Rate and subscribe :D

Pros-

:Good looks
:45-50ft Range
:Good Power
:Sights
:VERY easy to pull trigger

Cons-
:Single shot
:Could use some

I WILL post this one, sorry bout the Offspring, some little boogers smashed it and i didnt want to remake because  it would take WAY tooo long, so I made this for you guys, Thanks for all the subscribers, and wonderful comments you guys leave :D


:Update -
I now have made a removable mag with bullets to be held in it, so you dont have to carry around blue rods, just pull one out of the little hole :D

:Update 2-
The gun can missfire occasionally, im trying to fix that right now, but as of now, it is going under fixing and tweaking.

:Update 3-
The gun no longer misfires, and the trigger is reinforced, the only problem im facing right now, it the way you load it, if not pulled back far enough, the trigger wont go into place, so im working on it just a little more.

Comments

Puddock (author)2011-12-19

Awesome! This is the best one yet.

rheath2 (author)2011-11-21

POST, MAN, PPPPPPPPPPPPPOOOOOOOOOOOOOOOOOSSSSSSSSSSSTTTTTTTTTTTTTT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Senior Waffleman (author)rheath22011-11-21

Its been posted, go to my Profile and click the one that just says Knex AUG

erikos kostarikos (author)2011-07-06

Post the hell out of that beast!

HAHA, Thanks XD

No dude, really.
You should post it, I think you will easily get 5 stars on it.
I mean watch the comments, everybody LOVES it. :D

Im gonna :P

Good, I will build it right after it's posted. :)
If it shoots well, I'll give you 5 stars because the looks are already worth 4.5 stars.
xD

If someone doesn't give the instructions 5 stars, I think it will be time for me, you and many more people to team up and kill them with this gun.

I agree.
We must and WILL destroy the infidels!!!

dr. richtofen (author)2011-08-05

that's one very awesome gun, will you post it?

Yeah im posting, but im gonna post another update first in a bit, thanks :D

np, and ok

TheAwesomestDude (author)2011-07-26

good job

Senior Waffleman (author)2011-07-13

Haha, its fine, you Russian? Lol, and yeah, im still tweaking this gun a bit, then ill post :D

yeah... my 1st language is russian. then my 2nd is english. and cool.

apples!!!!! (author)2011-07-06

Make that scope less square and it's damn near perfect. Good job!

Lol thanks, but i cant, cuz im all out of whice cons :I

Don't use whites, because they're a bit too large. I'm thinking some combination of reds or something. I dunno, just have fun with it!

Lol, but im not gonna mess with it, cuz i dont want to mees up anything in that area :I

Lol you wouldn't have to change much. It's all about going back and changing things in this business.

Well, im too lazy :P, you wanna try?

Actually, I think the square fits in much better for some reason. I think that it should be square-ish, but still follow the basic shape of the real one- I'll attempt one in a little while and post a lame one to kind of give you an idea of what I mean.

lol ok

Sorry 'bout that, I was busy yesterday. I found a bit of time this morning and here's a sort of rough outline of what I got. Btw, that yellow rod should be bendy, but I don't have any...so I tried to make it bendy >.> lol

Its good, but i dont see how you will see through that, i like the shape, but not the connection in the front, and half of the back, sorry if im being rude, but thanks for trying :D

I like the idea though, why dont you make your own?

Yeah, but i need to get the connections right, i like the ones i have.

I actually made it using the dimensions of your gun, and I also made a point not to use any white connectors.

Yeah, but, can u put a pic of the inside of your scope, so i can see what it looks like inside

Sure. It's impossible to get a shot where the opening looks like it does in person(it's much smaller in the picture), but this is the best I could do. The opening is a bit bigger than that of the center of a connector, if you want to use that as reference. And honestly, with the height of this scope and the fact that it's a K'nex gun, you probably shouldn't be using the scope if you want to hit your target :P

Yeah, cuz with my scope, i can see clearly and, and its pretty accurate :P

Well to be quite frank, there is no such thing as a K'nex scope since they're all just tubes that limit how much you can see lol.

yeah lol

I would recommend using that, it looks more realistic than what you have now.

Haha you can see through it, it's just more like looking through round scope than a bigger, square one. And the entire lower connectio wasn't what I was going for, I just added that on cause I was bored and wante to make it look more like real one :P haha I was just showing the scope itself really.

Haha, k :P

rec0n (author)2011-07-07

Looks nice. Mag is oversized though, which throws off the scale of the entire replica. 4*

Senior Waffleman (author)rec0n2011-07-07

Thanks, but oversized how? just made the average blue rod mag o:

rec0n (author)Senior Waffleman2011-07-07

Thats the problem. The blue rod mags are too wide.

Senior Waffleman (author)rec0n2011-07-07

Ohh, ok, but its not worth my time changing it :P

DJ Radio (author)2011-07-07

Great job man! You should make a rounded scope. Otherwise, this is the best one I've EVER seen.

Im all out of white cons, i would really love to do a round scope, but cant :/

To make it properly, it shouldn't be 100% white cons. But yeah if you do post and I get off my lazy butt, I could probably put a round scope on there for you.

Oh and it doesn't look like it uses a lot of white cons at all. Are you building multiple projects at once?

Senior Waffleman (author)2011-07-07

That would be great, but im still tweaking it :P

MegaMetal8 (author)2011-07-07

AMAZIN

Thanks :D

me is assisin (author)2011-07-07

well sorry to burst your bubble but,
if the trigger goes off too easy isn't that too bad?
that u accidently shoot? PS it looks really good!
try to edit it so it looks more like an Aug A3:D

No no no, you got it wrong, it doesnt go off too easy, its just the length of the trigger in the inside is a tad too short so the rod doesnt get into the right place, and can missfire, im still working on it. But anyways, thanks :D and ill take a look :P

i see.. but does the white/grey connector not snap off?
and maybe u could make it for other people *whistle*

What are you talking about?

About This Instructable

1,266views

1favorite

License:

Bio: i like to mess with knex, i think they are a very creative kinda toy for people that like to build things of all sorts ... More »
More by Senior Waffleman:Knex Gun: InfinityKnex Crossbow: TurbulanceKnex Gun: Galil
Add instructable to: