Knex Steyr Aug [Update 3]

 by Senior Waffleman
A knex Aug I made, hope you guys like, and enjoy =)

P.S Please Comment Rate and subscribe :D

Pros-

:Good looks
:45-50ft Range
:Good Power
:Sights
:VERY easy to pull trigger

Cons-
:Single shot
:Could use some

I WILL post this one, sorry bout the Offspring, some little boogers smashed it and i didnt want to remake because  it would take WAY tooo long, so I made this for you guys, Thanks for all the subscribers, and wonderful comments you guys leave :D


:Update -
I now have made a removable mag with bullets to be held in it, so you dont have to carry around blue rods, just pull one out of the little hole :D

:Update 2-
The gun can missfire occasionally, im trying to fix that right now, but as of now, it is going under fixing and tweaking.

:Update 3-
The gun no longer misfires, and the trigger is reinforced, the only problem im facing right now, it the way you load it, if not pulled back far enough, the trigger wont go into place, so im working on it just a little more.
Puddock says: Dec 19, 2011. 5:12 PM
Awesome! This is the best one yet.
rheath2 says: Nov 21, 2011. 4:36 PM
POST, MAN, PPPPPPPPPPPPPOOOOOOOOOOOOOOOOOSSSSSSSSSSSTTTTTTTTTTTTTT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Senior Waffleman (author) in reply to rheath2Nov 21, 2011. 5:12 PM
Its been posted, go to my Profile and click the one that just says Knex AUG
erikos kostarikos says: Jul 6, 2011. 2:10 PM
Post the hell out of that beast!
Senior Waffleman (author) in reply to erikos kostarikosJul 6, 2011. 2:55 PM
HAHA, Thanks XD
erikos kostarikos in reply to Senior WafflemanJul 19, 2011. 2:16 PM
No dude, really.
You should post it, I think you will easily get 5 stars on it.
I mean watch the comments, everybody LOVES it. :D
Senior Waffleman (author) in reply to erikos kostarikosJul 19, 2011. 4:00 PM
Im gonna :P
erikos kostarikos in reply to Senior WafflemanJul 26, 2011. 7:40 AM
Good, I will build it right after it's posted. :)
If it shoots well, I'll give you 5 stars because the looks are already worth 4.5 stars.
xD
killersir751 in reply to erikos kostarikosAug 11, 2011. 9:44 AM
If someone doesn't give the instructions 5 stars, I think it will be time for me, you and many more people to team up and kill them with this gun.
erikos kostarikos in reply to killersir751Aug 12, 2011. 3:29 AM
I agree.
We must and WILL destroy the infidels!!!
dr. richtofen says: Aug 5, 2011. 12:01 PM
that's one very awesome gun, will you post it?
Senior Waffleman (author) in reply to dr. richtofenAug 6, 2011. 10:36 AM
Yeah im posting, but im gonna post another update first in a bit, thanks :D
dr. richtofen in reply to Senior WafflemanAug 6, 2011. 10:49 AM
np, and ok
TheAwesomestDude says: Jul 26, 2011. 5:24 PM
good job
gassybeans says: Jul 13, 2011. 10:18 AM
(removed by author or community request)
Senior Waffleman (author) in reply to gassybeansJul 13, 2011. 10:23 AM
Haha, its fine, you Russian? Lol, and yeah, im still tweaking this gun a bit, then ill post :D
gassybeans in reply to Senior WafflemanJul 14, 2011. 2:03 PM
yeah... my 1st language is russian. then my 2nd is english. and cool.
apples!!!!! says: Jul 6, 2011. 8:21 PM
Make that scope less square and it's damn near perfect. Good job!
Senior Waffleman (author) in reply to apples!!!!!Jul 6, 2011. 10:10 PM
Lol thanks, but i cant, cuz im all out of whice cons :I
apples!!!!! in reply to Senior WafflemanJul 7, 2011. 7:33 AM
Don't use whites, because they're a bit too large. I'm thinking some combination of reds or something. I dunno, just have fun with it!
Senior Waffleman (author) in reply to apples!!!!!Jul 7, 2011. 7:47 AM
Lol, but im not gonna mess with it, cuz i dont want to mees up anything in that area :I
apples!!!!! in reply to Senior WafflemanJul 7, 2011. 9:20 AM
Lol you wouldn't have to change much. It's all about going back and changing things in this business.
Senior Waffleman (author) in reply to apples!!!!!Jul 7, 2011. 9:32 AM
Well, im too lazy :P, you wanna try?
apples!!!!! in reply to Senior WafflemanJul 7, 2011. 12:19 PM
Actually, I think the square fits in much better for some reason. I think that it should be square-ish, but still follow the basic shape of the real one- I'll attempt one in a little while and post a lame one to kind of give you an idea of what I mean.
Senior Waffleman (author) in reply to apples!!!!!Jul 7, 2011. 3:06 PM
lol ok
apples!!!!! in reply to Senior WafflemanJul 8, 2011. 8:01 AM
Sorry 'bout that, I was busy yesterday. I found a bit of time this morning and here's a sort of rough outline of what I got. Btw, that yellow rod should be bendy, but I don't have any...so I tried to make it bendy >.> lol
IMAGE_323.jpg
Senior Waffleman (author) in reply to apples!!!!!Jul 8, 2011. 10:22 AM
Its good, but i dont see how you will see through that, i like the shape, but not the connection in the front, and half of the back, sorry if im being rude, but thanks for trying :D

I like the idea though, why dont you make your own?
Senior Waffleman (author) in reply to Senior WafflemanJul 8, 2011. 10:59 PM
Yeah, but i need to get the connections right, i like the ones i have.
apples!!!!! in reply to Senior WafflemanJul 9, 2011. 8:35 AM
I actually made it using the dimensions of your gun, and I also made a point not to use any white connectors.
Senior Waffleman (author) in reply to apples!!!!!Jul 9, 2011. 11:50 AM
Yeah, but, can u put a pic of the inside of your scope, so i can see what it looks like inside
apples!!!!! in reply to Senior WafflemanJul 9, 2011. 12:50 PM
Sure. It's impossible to get a shot where the opening looks like it does in person(it's much smaller in the picture), but this is the best I could do. The opening is a bit bigger than that of the center of a connector, if you want to use that as reference. And honestly, with the height of this scope and the fact that it's a K'nex gun, you probably shouldn't be using the scope if you want to hit your target :P
IMAGE_330.jpg
Senior Waffleman (author) in reply to apples!!!!!Jul 9, 2011. 3:10 PM
Yeah, cuz with my scope, i can see clearly and, and its pretty accurate :P
apples!!!!! in reply to Senior WafflemanJul 9, 2011. 3:19 PM
Well to be quite frank, there is no such thing as a K'nex scope since they're all just tubes that limit how much you can see lol.
Senior Waffleman (author) in reply to apples!!!!!Jul 9, 2011. 3:25 PM
yeah lol
DJ Radio in reply to Senior WafflemanJul 8, 2011. 8:35 PM
I would recommend using that, it looks more realistic than what you have now.
apples!!!!! in reply to Senior WafflemanJul 8, 2011. 10:40 AM
Haha you can see through it, it's just more like looking through round scope than a bigger, square one. And the entire lower connectio wasn't what I was going for, I just added that on cause I was bored and wante to make it look more like real one :P haha I was just showing the scope itself really.
Senior Waffleman (author) in reply to apples!!!!!Jul 8, 2011. 11:37 AM
Haha, k :P
rec0n says: Jul 7, 2011. 10:12 AM
Looks nice. Mag is oversized though, which throws off the scale of the entire replica. 4*
Senior Waffleman (author) in reply to rec0nJul 7, 2011. 10:29 AM
Thanks, but oversized how? just made the average blue rod mag o:
rec0n in reply to Senior WafflemanJul 7, 2011. 11:07 AM
Thats the problem. The blue rod mags are too wide.
Senior Waffleman (author) in reply to rec0nJul 7, 2011. 3:06 PM
Ohh, ok, but its not worth my time changing it :P
DJ Radio says: Jul 7, 2011. 12:27 AM
Great job man! You should make a rounded scope. Otherwise, this is the best one I've EVER seen.
Senior Waffleman (author) in reply to DJ RadioJul 7, 2011. 5:50 AM
Im all out of white cons, i would really love to do a round scope, but cant :/
DJ Radio in reply to Senior WafflemanJul 7, 2011. 10:31 AM
To make it properly, it shouldn't be 100% white cons. But yeah if you do post and I get off my lazy butt, I could probably put a round scope on there for you.

Oh and it doesn't look like it uses a lot of white cons at all. Are you building multiple projects at once?
Senior Waffleman (author) says: Jul 7, 2011. 10:30 AM
That would be great, but im still tweaking it :P
MegaMetal8 says: Jul 7, 2011. 10:14 AM
AMAZIN
Senior Waffleman (author) in reply to MegaMetal8Jul 7, 2011. 10:29 AM
Thanks :D
DELETED_Blue Mullet says: Jul 6, 2011. 8:13 AM
(removed by author or community request)
Senior Waffleman (author) in reply to DELETED_Blue MulletJul 6, 2011. 8:46 AM
Yeah, i know, but im no good with that kind of triggers. Anyway, thanks alot :D
DELETED_Blue Mullet in reply to Senior WafflemanJul 6, 2011. 9:17 AM
(removed by author or community request)
Senior Waffleman (author) in reply to DELETED_Blue MulletJul 6, 2011. 2:55 PM
Yeah, but i didnt want to deal with crazy mechs, i wanted it to be simple, and single shot add room for power.
DELETED_Blue Mullet in reply to Senior WafflemanJul 7, 2011. 7:24 AM
(removed by author or community request)
Senior Waffleman (author) in reply to DELETED_Blue MulletJul 7, 2011. 7:29 AM
Mine doesnt actually work, it just holds bullets so you dont have to be carrying around blue rods in ur pocket so often.
me is assisin says: Jul 7, 2011. 6:08 AM
well sorry to burst your bubble but,
if the trigger goes off too easy isn't that too bad?
that u accidently shoot? PS it looks really good!
try to edit it so it looks more like an Aug A3:D
Senior Waffleman (author) in reply to me is assisinJul 7, 2011. 6:58 AM
I dont like the way the A3 looks :I
Senior Waffleman (author) in reply to me is assisinJul 7, 2011. 6:57 AM
No no no, you got it wrong, it doesnt go off too easy, its just the length of the trigger in the inside is a tad too short so the rod doesnt get into the right place, and can missfire, im still working on it. But anyways, thanks :D and ill take a look :P
me is assisin in reply to Senior WafflemanJul 7, 2011. 7:09 AM
i see.. but does the white/grey connector not snap off?
and maybe u could make it for other people *whistle*
Senior Waffleman (author) in reply to me is assisinJul 7, 2011. 7:29 AM
What are you talking about?
me is assisin in reply to Senior WafflemanJul 7, 2011. 8:15 AM
that the grey connector(the trigger).
does it not snap off easily?
or did you tape it?
Senior Waffleman (author) in reply to me is assisinJul 7, 2011. 8:23 AM
Its a grey/white rod, and no, didnt tape it, and it doesnt break on me
beanieostrich says: Jul 6, 2011. 12:32 PM
This is an EPIC gun =D 5*
Senior Waffleman (author) in reply to beanieostrichJul 6, 2011. 2:55 PM
Thanks :D
beanieostrich in reply to Senior WafflemanJul 6, 2011. 2:56 PM
No problem mate =D
knexinventer says: Jul 6, 2011. 2:37 PM
post
Senior Waffleman (author) in reply to knexinventerJul 6, 2011. 2:55 PM
Soon :D
the vengeful aug says: Jul 6, 2011. 8:13 AM
Really,really good. I was gonna make one from scratch but i guess i don't have to now.
Senior Waffleman (author) in reply to the vengeful augJul 6, 2011. 8:46 AM
Lol, thanks :D
the vengeful aug in reply to Senior WafflemanJul 6, 2011. 8:52 AM
seen my m4?
Senior Waffleman (author) in reply to the vengeful augJul 6, 2011. 8:54 AM
No :O Hold on :D
mahmel says: Jul 6, 2011. 5:11 AM
Perfect! I can't say more. Does it shoot good?:)
Senior Waffleman (author) in reply to mahmelJul 6, 2011. 7:22 AM
Oh, and BTW, your comment was #1400 :D
mahmel in reply to Senior WafflemanJul 6, 2011. 7:26 AM
Congrats, haha
Senior Waffleman (author) in reply to mahmelJul 6, 2011. 7:17 AM
Yes, very good, very smooth design as i should say, easy to fire, easy to load, great power :D
War Hawk One says: Jul 6, 2011. 3:17 AM
Dude you earned 5* like always but are you gonna post this?
~KGB~ says: Jul 6, 2011. 2:30 AM
thats epic! =D
Senior Waffleman (author) in reply to ~KGB~Jul 6, 2011. 2:42 AM
Thanks :D
~KGB~ in reply to Senior WafflemanJul 6, 2011. 2:44 AM
no problem! =D
The Nomlack says: Jul 5, 2011. 10:49 PM
FIRST! And you better post this real soooon!
Senior Waffleman (author) in reply to The NomlackJul 5, 2011. 11:12 PM
HAHAHA, thanks :D and i will
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!