Introduction: Knex TCAW Build

Picture of Knex TCAW Build

This is how to build the TCAW. Time to get started. :)


tifpohh (author)2013-09-30

I build it, overall it's a great looking and working gun!

the instructions are clear for me and I added a forgrip and other sights.

only downside it the trigger, ones I put more than 2 normal (thin) rubber bands on the trigger jam.. It shoots like 5 meter straight. overal great!

haloman117 (author)2013-07-25

Awesome! I've just received my free minecraft giftcode!

>> <<

haloman117 (author)2013-07-25

Awesome! I've just received my free minecraft giftcode!

>> <<

megustatrains (author)2013-07-19

By far the shortest instructions ever for a good assualt rifle. looks cool :D

Vaetheon (author)megustatrains2013-07-19

Thanks :D

megustatrains (author)Vaetheon2013-07-20

np :D

TheAwesomestDude (author)2012-12-03


Thanks the Vorganjund is posted now

ive already commented on it lol

Knex.Guy (author)2012-12-03

Thanks! Helps a lot! One last question... Could you explain the mag pusher? I dont see anything about it.

P.S. Somehow the Reply function wont work :s

Vaetheon (author)Knex.Guy2012-12-03

Green rod, red connector, red rod, and orange connector

Knex.Guy (author)2012-11-26

When will you send/post the pictures? Thanks in advance!

Vaetheon (author)Knex.Guy2012-11-27

I'll try to do it this week

Knex.Guy (author)2012-11-11

I really like this gun, and I am almost done building. As you said before, If you have some experience, it is possible to make it from these pictures. So yeah, almost done now, but can you please make a picture of the internal of the mag. And how does the mag pusher work, if there is one?

Thanks in advance!

Vaetheon (author)Knex.Guy2012-11-11

thanks and I will

2000smartkid (author)2012-10-14

Can you make these instructions more detailed?
If it is detailed, like Seleziona's instructables, then I will consider building it.

Vaetheon (author)2000smartkid2012-10-14

what needs to be more detailed? plus its already apart

2000smartkid (author)Vaetheon2012-10-23

Yeah, but some parts are not fully apart, like the stock, some of the internals, the handle, and you could take off one of the panels on the mag to show the inside. All these fixes would greatly help me.

Vaetheon (author)2000smartkid2012-10-24

I don't see how this is really that hard but I guess you just haven't had as much experience as me

didexo (author)2012-10-17

Might buil it.

Vaetheon (author)didexo2012-10-17


kwintisolo12234 (author)2012-10-03

i think i might build this in the weekend.
does it use any broken/cut pieces?

Vaetheon (author)kwintisolo122342012-10-03

cool. 3 white rods, 1 blue rod, and a cut grey connector under the circular part. so yes, it has broken pieces.

kwintisolo12234 (author)Vaetheon2012-10-04

is the blue one really necessary for the handle part?

Vaetheon (author)kwintisolo122342012-10-04

It was just in the way for my hand it doesn't have to be cut

SumRndmGuy (author)2012-08-29

personally i see a scar with a different stock, but i still like it ;) well done

~Meme~ (author)SumRndmGuy2012-09-05


Vaetheon (author)SumRndmGuy2012-08-29


jiansy (author)2012-08-24

It looks sleek which gives it a more realistic look to it

Vaetheon (author)jiansy2012-08-24


About This Instructable




Bio: I like to build knex rifles, crossbows and other knex things that shoot some kind of ammunition. I will take suggestions from anyone if they ... More »
More by Vaetheon:Knex Rifle "Locke"Knex PKG V2 (Pump-action Knex Gun)Knex M1911 With Removable Mag
Add instructable to: