Picture of Knex TR12 Turret Instructions
Well here it is. WARNING: requires cut parts. You must have A TR gun body if you want this turret to work.

Step 1: Making the Turret

Read all image notes.
DB20164 years ago
Talk about overkill, if you're going to break that many pieces it's not even k'nex.
i know you posted this a long time ago, but i stumbled upon it, and had to say: disagree !!! broken parts are still k'nex. i don't think the broken parts used here are needed, but some mechanism's do require quite a few broken pieces, and most people have them. the main broken pieces you want to have is at least a half dozen broken white rods and 2-6 broken orange connectors (cut in half)...
Well, I just ground up 20,000 grey connectors, and molded them into a Famas. It shoots better than an airsoft gun, with the mechanism I installed. It's a k'nex gun, right?
omg epic. you have to post a picture lol!!! did you use a regular pin mechanism? shoots BBs i assume?
Raz1r Knex Bull3t (author)  DB20164 years ago
I had these pieces broken before from past experiences.
But how many other people have? I just hate to see broken pieces because I don't have very many, haha.
Raz1r Knex Bull3t (author)  DB20164 years ago
Believe me, I'm not of fan of broken pieces either.
Meh. Either way.
DJ Radio4 years ago
The only broken part I see could be replaced with 2 spacers. So unless I'm missing something broken parts aren't required.
Raz1r Knex Bull3t (author)  DJ Radio4 years ago
Yeah there is, look at the second step, you have to cut parts on the gun part if you want the gun to work.
Please enlighten me more with pictures.
Raz1r Knex Bull3t (author)  TheRacker3 years ago
This thing has been long gone...........
Oh, ok. But do you at least remember what parts on the gun were cut?
Raz1r Knex Bull3t (author)  TheRacker3 years ago
=( oh well
TigerNod4 years ago
Oh, wait... So it doesn't work on, say, a turret pistol for example?
Raz1r Knex Bull3t (author)  TigerNod4 years ago
It probably would, but you would have to customize the turret to work with the turret.
"...customize the turret to work with the turret." LOL.
sorry, meant customize the turret to work with the gun.
wiggster4 years ago
I built oodalumps' "Handle Pump TR8" and modded the front a bit and this turret works great. Thanks for posting. 5*
Raz1r Knex Bull3t (author) 4 years ago
Here, this is the TR gun body you should have.
~KGB~4 years ago
nice, mite add one on to my tr8
The Nomlack4 years ago
cool other than the brocken parts!
slimshaddy4 years ago
5* thx for posting
MegaMetal84 years ago
Pretty good 4*