Introduction: Knex Thor's Hammer

This here is my First Instructable, so speak your mind about what you think of it.  Here is a piece count:

Connectors:
12 Green
16 Gray
14 Orange
108 Red
2 White Snowflakes

Rods:
4 Green
4 White
110 Blue
6 Yellow
8 Red
4 Gray

Step 1: The Handle

This is the Handle and the part that connects the Hammer-Head and the Handle.

1) Build this
2) Build this twice
3) Connect as instructed

Step 2: The Hammer-Head

The most armoured part of the Hammer..... The Hammer-Head.  

1) Build two of these.
2) Build two of these.
3) Place these rods.
4) Place these rods.
4) Connect as Instructed.

Step 3: You're Done!

Now ya just connect the two together and then you're done!  Again, sorry for the blurry pics. Talk to me for suggestions.  Preferrably a PM.

Comments

author
Neon__Knight (author)2012-06-26

I think I did a good job on it! XD

author
~Meme~ (author)Neon__Knight2012-08-22

It's ok, maybe fill in the area connecting the actual 'hammer' in with a white connector,

About This Instructable

629views

1favorite

License:

Bio: I am a simple K'nex-building person. With an...... ummmm...... Adequate building skill. I don't build difficult 'Ibles.
More by Neon__Knight:Knex Thor's Hammer
Add instructable to: