Introduction: Knex Top Loading Rifle V. 1.0

Picture of Knex Top Loading Rifle V. 1.0

This is my third gun, second instructions.

Credit:
Gun: Me 
Parts list: headlessknight

Pros:

Shoots around 40-50 feet
Easy to reload
Comfy handle
Has a internal mag pusher

Cons:

A bit hard to pull the trigger
Holds only 4 bullets
Not the best connection between the body and the handle

                                Parts list

      rods

greens 159
white 59
blue 15
yellow 5
red 3
grey / back 1

  connectors

grey 15
Lt grey 1
orange 23
red 28
green 10
yellow 60
       
     misc

y hands 16
tan clips 2
ball socket 3
modded 
white rod ends 3

Step 1: Stock

Picture of Stock

Step 2: The Handle

Picture of The Handle

Step 3: The Main Body

Picture of The Main Body

Step 4: Assembly

Picture of Assembly

Step 5: Ram and Banding

Picture of Ram and Banding

Step 6: Loading

Picture of Loading

Comments

mahmel (author)2012-01-05

With some modifications you can make this look like an USP.45
I like the mag!

The Nomlack (author)mahmel2012-01-05

Hmm never thought of that...
And thanks!

headlessknight (author)2011-05-20

part list
rods
greens 159
white 59
blue 15
yellow 5
red 3
grey / back 1
connectors
grey 15
Lt grey 1
orange 23
red 28
green 10
yellow 60
misc
y hands 16
tan clips 2
ball socket 3
modded
white rod ends 3

Thanks!

you are welcome

headlessknight (author)2011-05-20

minus ammo

SomeAsianKid (author)2011-03-26

Piece Count please

i'll give a piece count for this give me some time to build it

james4 (author)2011-03-23

awesome!

Icetank (author)2011-02-20

Great!

An Villain (author)2011-02-11

This is a Pistol (albeit a large one) with a stock on the end.

The Nomlack (author)An Villain2011-02-11

kinda...

An Villain (author)The Nomlack2011-02-12

Yes.

The Nomlack (author)An Villain2011-02-13

Yep. it does.

An Villain (author)The Nomlack2011-02-14

Yes.

The Nomlack (author)An Villain2011-02-15

Hey geodez... You've had more than 3 yes no arguments.


Ummm... NO!

An Villain (author)The Nomlack2011-02-16

Probably more than that, if you look through my comments about 1/3 are yes/no comments.

The Nomlack (author)An Villain2011-02-16

lol no

An Villain (author)The Nomlack2011-02-16

Yes.

CuddlesMcT (author)2011-02-12

This is a good basic layout for an M1 garand :)

NatNoBrains (author)2011-02-11

Couldn't you use ammo like this (Not the tan clip, the blue clip) So you don't have to cut any pieces:

The Nomlack (author)NatNoBrains2011-02-12

try it out. it looks like it can work.

slimshaddy (author)2011-02-11

i am going to make this gun tomorrow or tonight but it still looks awesome.

altair ibn la ahad (author)2011-02-11

beast

TheFoofinator (author)2011-02-10

Nice. It could do with some improvements: Closer trigger and ram guide. Apart from that it looks Kewl. Oh and you probably don't need to both with the flappy thing on top. The bullets will stay in without it. Nice mag design! Might build next week.

thanks. i mainly posted it for the mech, and i plan to improve it alot

ryry2011 (author)2011-02-10

cool

SLDxRaPiiDZz (author)2011-02-10

Nice

Vynash (author)2011-02-10

Nice!

~KGB~ (author)2011-02-10

nice!

Senior Waffleman (author)2011-02-09

And FIRST

Senior Waffleman (author)2011-02-09

The rods not only stop the rod from connecting to the ammo, it also stops the ram from breaking the connector as well, and this could use some work

About This Instructable

1,021views

7favorites

License:

Bio: I am a person.
More by The Nomlack:Knex Top Loading Rifle V. 1.0Knex Top Loading PistolKnex Camera Gun
Add instructable to: