Introduction: Knex Train

This is a knex train I made with the 800 piece super value set.(Item 352220) The only thing that is not from this set is the Grey rods -4 the wheels and the motor.The Grey rods,motor and wheel are from a set I lost the label to.
 

Step 1: Piece Count

ADD 2 BLUE RODS ADD 1 RED RODS ADD 2 WHITE CONNECTERS TAKE AWAY 1 WHITE ROD

Rods

Red 3
Grey 18
Yellow 4
White 15
Blue 18
Green 11

Connecters

Yellow 26
White 18
Orange 11

Spacers

Grey 4

Other

Wheel 2
Tan Thing 2
Moter 1

Also make note that the motor needs 2 AA batteries...

Step 2: Support Beams

Repeat picture 1-2 9x Repeat picture 3-4 2x

Step 3: Making the Train

Knex moter plus Red rod plus 2 grey spacers on each side. Step 3 put tan thing on rod,thing coming out into hole in wheel.

Step 4: Rails

step 1 x9

Step 5: Put It All Together

Your Done! 2 red rods are on the ends.

Comments

author
hunter999 (author)2014-04-05

Cool, though as an improvement, you should try to make it more sturdy.

author
Alicat 123 (author)hunter9992014-04-18

i'll try

author
sandroknexmaster (author)2014-04-07

Nice, I'd just make it a bit stronger :)

author

cool... i will try

author
nerfrocketeer (author)2014-04-04

Cool!

author
Alicat 123 (author)nerfrocketeer2014-04-04

Thanks...

author
TheAwesomestDude (author)2014-04-03

You should try to make the track longer with an actual Train Car. Nice job on it!

author

Thanks...

author

Your welcome!

author
craftclarity (author)2014-04-03

Way cool!

author
Alicat 123 (author)craftclarity2014-04-03

Thanks,this is my first instructionable and I wasn't expecting much feed back...

About This Instructable

2,048views

1favorite

License:

More by Alicat 123:Knex train Version 2Knex Train
Add instructable to: