Introduction: Knex M1 Carbine
Oh my god It's here! my carbine...
specifications:
60+ feet range with rod bullet and no fins (with only 2 #64 rubber bands...!) Or 100+ feet (with 5 #64's)
around 50+ or so feet per second (my Ak-47 with same mechanism and power got that...might post if get requests)
power = 1 inch penetration of very thick cardboard box with sharpened red rod on yellow connector at 1 foot of range =) Or with 5 rubber bands at a few feet with a yellow rod on yellow connector it pierced all the way and the connector went halfway through the box. =)
magazine: don't work as a magazine because its a sling mechanism (they own) but it can hold bullets:number varies on type of bullet)
stock: from the winchester
made to compete with: I don't know, maybe all those carbons with clip trigger system?
Step 1: Parts Lists =)
I've always wished all Knex guns had these... so I made one for you!
Parts
connectors:
Yellow:66
orange:32
green:16
white:4
grey:3
Rods:
white:59
blue 3d:5
green:97
yellow:6
Other:
Y connector:10
Step 2: Barrel
The short thin thing on the front of the rifle. Here are instructions
1: what you're making
2:make 2
3:supports on 1
4:make
5:add
6:connect and done!
Step 3: Body
The hardest part... get ready
1: make
2:supports+rails
3:connect
4:make. trigger parts
5:more trigger parts
6:and some more trigger parts
7: bit blurry but put top of trigger in
8:put bottom in and done!
Step 4: Magazine
pretty simple. just a place to put extra bullets really.
1:make 2
2:supports
3:make 2
4:place
5:connect and done!
Step 5: Handle/stock
the same as the one on the winchester rifle but a diffrent handle.
make the stock here(credit to tomboyrme)
2:handle. make 2
3:top view
Step 6: Connecting
The final step!
1:stock/handle to body
2:body to barrerl
3:body to magazine
This gun is done!
Step 7: Loading+firing
hot to load and fire
1:lock the trigger
2+3:rubberise the trigger
4+5: rubberise the barrel
6: put bullet in place
7:pull to fire
Step 8: Total Pwnege
lol look at my pwnege puppy dog!