Knex Connector Sorter Machine

This instructable is a collaboration between me and Sorunome. If you subscribe to me
subscribe to Sorunome as well.

Click here for part 1 (The rod sorter)!

Step 1: Part Count

Part count

Connectors
dark grey 45
blue 12
purple 52
white 24
yellow 136
green 2
red 5

Rods
yellow 59
blue 56
green 163

Misc
Spacers
blue 5
grey 6

Clips
blue 2
tan 6

Step 2: Sorter Tray

It is very similar to the rod sorter, pay attention to the holes. It is six yellow connectors wide.

Step 3: Case Pt. 1

There's not much to be said here....just follow the image notes.

Step 4: Case Pt. 2

There's not much to be said here....just follow the image notes....again. Oh sorry for the rotated pics :(

Step 5: Put It Together

The sorter tray attaches on the grey (and one red) connectors. The tray is meant to be slanted.