Instructables
this is my first ever instructable so please excuse any hard to follow directions. this is my "piece conservative" crossbow. it has a range of about 30ft shot flat and 40-50ft angled. it also feqatures a new type of trigger that works really well.
p.s. please rate and sub!

also check out my combat/tactical knife at; http://www.instructables.com/id/knex-combattactical-knife/
 
Remove these adsRemove these ads by Signing Up

Step 1: Bow

make/gather two of every thing although when assembling make in reverse
pic 6 make four 
pic 10 flip to under side

Step 2: Rail

pic 1 make three
pic 2 make two
pic 3 gather nine
pic 4 assemble like this
pic 5 add the two other rails
pic 6 add these snowflake connectors
pic 7 dont forget the blue clip
pic 8 attach to bow like this
pic 9 another veiw

Step 3: Handle+trigger

Step 5: Main bands

do exactly as the pictures show and you should have no problems

i used two 8in bands that r broken but u can put two 6 or 8in bands together and just anchor them in the same places as shown
pic 4 it is crucial that when loading, that the band(s) r placed higher than the notch in the connector
mrknex30002 years ago
(removed by author or community request)
the_boss_builder (author)  mrknex30002 years ago
i would but i took it apart several months ago so please just read the captions and bubble texts and do your best