Picture of Knex gun- Pain Pistol
-Safe yet painful
-Can make dents in cardboard.
-New type of firing
-Takes a fair amount of time to reload
-One shot
Remove these adsRemove these ads by Signing Up

Step 1: Step 1

Picture of Step 1
Assemble the following:

Step 2: Materials

1 rubber band

6 green
2 dark grey

2 yellow
1 blue
3 white
2 red

Step 3: Step 2

Picture of Step 2
Combind the parts that you assembled to make the following:

Step 4: Bullet

Slide a rubber band inside a dark grey piece.

Step 5: Step 3

Picture of Step 3
Assemble and insert the following.
Then attach the bullet

Step 6: Step 4

Picture of Step 4
Stretch the rubber band to the tips of the red rods as shown:

Step 7: Firing

Picture of Firing
Hold handle (yellow rods) and pull trigger (green connector right behind the bullet)
Hiyadudez5 years ago
Im sorry but please do not post rubbish like this as no one will build.

Also , why do you really need to post instructions and steps for something so simple. I mean, anyone could just build it from the 1st picture.
ummm......I wouldn't be able to.
I built it. Its good, kinda. And where are your "non rubbish" instructables?
charge11595 (author)  knex_mepalm5 years ago
received good comments, but is kinda ugly. It's a new kind of firing system.
charge11595 (author)  knex_mepalm5 years ago
 Ok, just relax. no need to use caps
charge11595 (author)  Hiyadudez5 years ago
Please be constructive. Without it, how can I improve my gun? All I know is know to improve the instructable!
charge11595 (author)  Hiyadudez5 years ago
Did u even build it?
Haha, I built it just to prove you wrong!
Lol! :)
Bartboy5 years ago
Not as good as the Devourer of souls...
This has a trigger, Devourer doesn't.
So? It's still better....
They both suck. End of story.
DJ Radio5 years ago