Instructables
Picture of K'nex gun (pistol)
This is what you will hopefully make. There is about 8 main steps. Pease bear with me as these pictures are from a cell phone that frankly sucks. These steps may be hard to follow but the reward is great.
 
Remove these adsRemove these ads by Signing Up

Step 1: Handle

Picture of handle
This is the handle you can supp it up all you want please just be patient.

Step 2: Barrel

Picture of barrel
This is the barrel note the blue peice between the yellow and grey half peice's. There are 22 of the half peice's

Step 3: The trigger

Picture of the trigger
I know this doesnt look like a triigger but you'll see. DON'T FORGET THE RUBBER BANDS.

Step 4: Plunger

Picture of plunger
This is easy just make sure the rubber band is holding it together tight

Step 5: Putting it together part one

Picture of putting it together part one
handle to the barrel

Step 6: Part two

Picture of part two
This is the trigger system note where the flipper is

Step 7: Part 3

Picture of part 3
This is the plunger just you should be able to put the rubber bands on yourself. This is the end plz comment and plz ask for more thnx for viewing!
NatNoBrains3 years ago
Not good...
knex instructor (author) 4 years ago
well sorry it wasnt what you waned but it was my first one that i built myself and i couldnt ''take a look around'' because i have dial up internet =-( i will try  to make a newer version.
You should've probably posted that as a reply to DJ Radio
(YOUR N4 years ago
meh it sucks
~KGB~4 years ago
meh...
DJ Radio4 years ago
Ha, I could build it just from the first picture.  But why would I?  We already have stuff better than this.  Take a look around and see what else is being posted before you post yours next time.
TigerNod4 years ago
Hm... Not so really good. Maybe if you could just build a frame around it, it would be better. For now, 2.0