This is a very simple, single shot block trigger, knex rifle.

Step 1: Gather the Pieces.

These are the pieces you will need for this rifle.

Step 2: Building the Barrel.

In this step you will build the barrel and the trigger.

Step 3: Barrel Extention.

Build this.

Step 4: Building the Stock and Handel.

Build this.

Step 5: Loading and Firing.

This rifle fires blue rods. To load the gun you pull back on the firing pin and the trigger will rock into place. Then you put the blue rod down the barrel and push sideways on the trigger and. BAM!!! the gun fires.
here it is my full body mod.... dont recognize it do you?
The instructions! <br/><br/><a href="https://www.instructables.com/id/Mod-to-sampson643-mini-rifle/">https://www.instructables.com/id/Mod-to-sampson643-mini-rifle/</a><br/>
no i don't but it looks really good
at least your not lying about what it is
Well you guys can mod it if you want.
I'll pass :).
Pretty sucky to say the least :(.
looks quite good, shame it's block trigger though... 3.5stars

About This Instructable




More by sampson643:Knex mini rifle Knex grenade 
Add instructable to: