Instructables

Knex arm gun made by s0lekill3r.

Hello, this is s0lekill3r's arm gun all the credit goes to him because I did not make it. He also said I have permission to post.

STATS
1.Pump action.

2.Block trigger.(It is OK the way this gun is.)

3.Good sight.

4.Magazine it holds like 12 blue rods or so.

5.Put your arm inside DUH.

6.Cool-ish mechanism.

7.Shoots about 30 ft.
 
Remove these adsRemove these ads by Signing Up

Step 1: Parts. (MAY BE A BIT OFF)

Parts.

38 Big green rods.

1 Roller Coaster splicer from the oldest ones.

32 Gray rods.

7 Snowflakes.

19 Orange connectors.

32 Green connectors.

2 Y connectors .

3 Decapitadeds.

2 Blue rods.

16 Blue spacers.

16 Dark gray connectors.

10 Blue tabs.

6 Green rods.

1 Black ball socket.

1 Tan red rod .

35 Blue connectors.

9 Silver spacer.

3 Tan clips.

64 5 way connectors.

5 light gray connectors.

80 White rods.

Duct tape.

As many rubber bands as you want.



361 Parts all together including duct tape and rubber bands.

Step 2: Here is the barrel and ram. (It's a block trigger.)

1.Ram.

2.Inside.

3.Higher view of inside.

4.Side view.

5.Bottom view.

6.It's upside down view.

7.Diagonal view.

8.add this gray connector.

9.Insert ram.

Step 3: The very front of the gun.

Just build off the pictures :)

1.Part of the pump.(Replace the blue rod with a yellow rod it will make it better.)

2.More pump.

3.Another view.

4.Build.

5.Put that together.

6.Put that together.

7.Now connect everything.

Step 4: Make all of this big step (I hope its not to hard.)

Good luck.

1.Make all of these.

2.Make.

3.Another view.

4.More views.

5.Just showing you the pattern up close

6.This is a different piece.

7.Another view

8.Another view

Step 5: Connecting and rubberbands WOOOO!!!!!

1.Put them on.

2.Another view.

3.now connect the front.

4.Another view.

5.Now add the front piece on.

6.Another view.

7.now connect that front part on to the barrel.

8.Tape that.

9.Another view

10.Tape the ram..

11.Now put the ram through that one one piece.

12.Put that band on.

13.Put Another band on the other side.



NatNoBrains3 years ago
I could do it if I had enough grey rods :(
agrey rod is the same size as 2 yellow rods on opisite side of a connecter
knex_builder_freak (author)  NatNoBrains3 years ago
Awww :-(
Smileys with noses SUCK!
knex_builder_freak (author)  NatNoBrains3 years ago
... NO
Yes
knex_builder_freak (author)  NatNoBrains3 years ago
Oooook... what if you smiled and didn't have a nose? :-F
Nothing
knex_builder_freak (author)  NatNoBrains3 years ago
:-F
...
Nothing.JPG
knex_builder_freak (author)  NatNoBrains3 years ago
:-F!
novakfor33 years ago
Cool! I like the design. Could be something out of Iron Man !
knex_builder_freak (author)  novakfor33 years ago
Haha, Iron Man Owns!
wiccan12344 years ago
 man e zer picks plz
knex_builder_freak (author)  wiccan12344 years ago
??? this is worlds easiest creation ???
do you think you could show a better explaination of how to put the barrel in the gun that would be great thanks 
It's not very hard, keep trying if you haven't got it yet :)

I can hardly remember how =O
1. tennis ball 2. a lamps base 3. there is another piece right there but it's not important. 4. OBOYOBOTOBOYOBOYOBOY... 5. hi 6. hello 7. hey 8. heyo 9. hey 10. muuhahahahhaahahhhahahaha 11. hey 12. hey 13. blah 14. blah 15. blah 16. dude stop 17. hey 18. your head explode 19. lolz 20. lolzeramma 21. roflcopter 22. rofledoctor 23. rofle 24. stop 25. dont try 26. ha 27. easy 28. easy 29. was up done! ive read them all
You Missed Some... 2.Just look At That Sight 3. Add me!
?
Yes, yes you did.
He deleted most of them i think.
lolololololololololololololololololololololololololololololol good job
Lowney4 years ago
Soooooo you got your DSi yet? (orangeboard is broken)
knex_builder_freak (author)  Lowney4 years ago
yeah i got it
Cool, ice blue i take it? My favourite colour 2
knex_builder_freak (author)  Lowney4 years ago
yeah the bright blue one! Best!
:D
xXxcashxXx5 years ago
do u have to use the cut pieces n step 2
knex_builder_freak (author)  xXxcashxXx5 years ago
No you can replace them with tan clips. for more performance do what I did but you the tan clips if you want.
thanks
knex_builder_freak (author)  xXxcashxXx5 years ago
You're welcome!
knexguru5 years ago
its really cool but hard to make especially with a broken arm!!! i turned it into a bazooka but all i changed was the sights and the barrel so it could hold the bullets when the gun was turnd on its side. But anyway i like it and i finally finished it today!!! Hurray!!! Took me 2 days!!!LOL!
knex_builder_freak (author)  knexguru5 years ago
aw man a broken arm and building this! anyway thx!
statified5 years ago
mauahahahaha hey heyo hey hello hi OBOYOBOTOTO etc just thought id reveal what was in the boxes
knex_builder_freak (author)  statified5 years ago
can you now XD
if i really want to...
knex_builder_freak (author)  statified5 years ago
yeah but it would take a while
King8255 years ago
I have to agree with jamalam... nearly no resemblance. Just because it goes on your arm doesn't make it a samus arm gun. I also adknowledge that this is not your gun. ummm... I haven't built it so yeah, 3 stars.
knex_builder_freak (author)  King8255 years ago
yeah i agree with him too, Thanks :)
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!