With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
Or bolt-action, pump-action, or whatever you want to call it. (it loads automatically)Shoots yellow rods, max. capacity 20. Colors and rubber band tensions vary. Modify as nessesary.*See below ...
If you don't have over 200 pieces, you can't make this. These lists do not include the ammo (yellow rods). *can be substituted for similar pieces
This is actually a 2-part trigger, but the first part wa included in the barrel.
Make sure the handle connects fully to the barrel.
The part in the last picture will go on later.
Make two of each of these pieces.
Make two of the first piece, and one of the second.
The rubber band should not be streatched to its fullest; if it is, connect two together instead.
Load ammo, pull back pin until it locks in place, and fire. If it jams, pull back the pin until it locks. Check that the ammo is in ...
Join 2 million + to receive instant DIY inspiration in your inbox.
© 2016 Autodesk, Inc.