Introduction: Knex Tow Truck Updated *again*

this is my truck or tow truck that represents my truck in real life that has a buggy rack on it..i do have a trailer that will hold some of my cars on it and hooks to the truck


for all of you that know what leaf springs are that hold up most truck front and back..those black zipp ties represent those..i have made them glue onto knex connecters and hold the front and back of my truck up.

i made a new rear end and removed the traction bars, added a fake block to the springs so it looks and acts like a real truck now

Comments

author
knex365 (author)2011-12-20

OK, I'll build that car on that trailer and then post you the feedback. then lets see what looks better.

author
JBomBer94 (author)knex3652011-12-20

allright if im correct u cant use glue or cut pieces good luck

author
knex365 (author)JBomBer942011-12-21

Here's the pictures:
Picture 1: Left side view
Picture 2: Front view
Picture 3: Right side suspension
Picture 4: Independant suspension
picture 5: Under carrage
Picture 6: Right side view

Picture 001.jpgPicture 003.jpgPicture 004.jpgPicture 005.jpgPicture 006.jpgPicture 007.jpg
author
The Chunky Sniper! (author)2011-10-27

Meh. Too many posts in too little time.

About This Instructable

1,741views

0favorites

License:

Bio: If you want pictures of my cars or want some info about them , message me , a lot of my cars have been changed to look ... More »
More by JBomBer94:Knex buggy #?Knex 7 truckKnex station wagon
Add instructable to: