Groups »
Forums »
Answers »

Featured Groups

  • Bare Conductive
  • Drawing and Art
  • Sustainability
  • 123D
  • Fenix Intl, Ready Set Off The Grid
  • Kollabora
  • 3D Printing

K'nex wheel lift with holes

 by Sorunome
 See All
2 Steps
  Favorite
P1060621.JPG
P1060626.JPG
This is a nice k'nex ball machine lift. This Idea was by Shadowman, it's just my design and i also made an instruction. Enjoy!

 
Remove these adsRemove these ads by Signing Up

Step 1: The Wheel

P1060483.JPG
P1060485.JPG
P1060486.JPG
P1060487.JPG
P1060490.JPG
P1060493.JPG
P1060495.JPG
P1060497.JPG
P1060498.JPG
P1060499.JPG
P1060501.JPG
P1060502.JPG
P1060503.JPG
P1060504.JPG
P1060506.JPG
P1060509.JPG
P1060513.JPG
P1060516.JPG
P1060517.JPG
P1060518.JPG
P1060519.JPG
P1060520.JPG
P1060522.JPG
P1060523.JPG
P1060525.JPG
P1060526.JPG
P1060527.JPG
P1060528.JPG
P1060530.JPG
P1060535.JPG
P1060536.JPG
P1060537.JPG
P1060539.JPG
P1060541.JPG
First you'll make the wheal.
1-40 of 44Next »
knexman32 says: Mar 20, 2012. 1:57 PM
you spelt wheel wrong
37
Sorunome (author) in reply to knexman32Mar 21, 2012. 5:34 AM
Just in the URL but the title is correct :P
knexman32 in reply to SorunomeMar 18, 2013. 3:21 PM
oh
4
blackboard says: Jun 30, 2011. 9:46 AM
were did u get all those balls from lol i said balls
37
Sorunome (author) in reply to blackboardJul 1, 2011. 5:19 AM
... balls from knex sets
4
blackboard in reply to SorunomeJul 1, 2011. 8:42 AM
oh like just by a lot of ball machine sets
37
Sorunome (author) in reply to blackboardJul 1, 2011. 12:30 PM
and pinballsets etc.
14
ryry2011 says: Feb 14, 2011. 2:01 PM
where di you get the balck ball from??? knexusergroup is that right
37
Sorunome (author) in reply to ryry2011Feb 15, 2011. 5:08 AM
nop, frome the electronic arcade! :Pbut i just use the red/yellow balls (have 13 of them!)
14
ryry2011 in reply to SorunomeFeb 15, 2011. 1:59 PM
ooooooooooooo
37
Sorunome (author) in reply to ryry2011Feb 16, 2011. 6:33 AM
:P how many knex balls do you have?
14
ryry2011 in reply to SorunomeFeb 16, 2011. 5:31 PM
i have 4 red 4 yellow 4 silver but they are coming in the mail
37
Sorunome (author) in reply to ryry2011Feb 17, 2011. 8:30 AM
oh, lol, i still have 5 different balls i don't use, coz i noticed that there is also a difference between the red/yellow ones and the other onse with two halves
14
ryry2011 in reply to SorunomeFeb 17, 2011. 12:42 PM
ya
37
Sorunome (author) in reply to ryry2011Feb 18, 2011. 5:49 AM
:)
14
ryry2011 in reply to SorunomeFeb 18, 2011. 6:00 AM
=D
37
Sorunome (author) in reply to ryry2011Feb 18, 2011. 6:24 AM
:D :D :D
14
ryry2011 in reply to SorunomeFeb 18, 2011. 6:26 AM
=D=D=D=D
37
Sorunome (author) in reply to ryry2011Feb 18, 2011. 7:39 AM
:D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D
14
ryry2011 in reply to SorunomeFeb 18, 2011. 7:34 PM
lol
37
Sorunome (author) in reply to ryry2011Feb 18, 2011. 11:24 PM
:)
5
DELETED_storm391 says: Dec 23, 2010. 11:27 AM
(removed by author or community request)
37
Sorunome (author) in reply to DELETED_storm391Dec 23, 2010. 12:14 PM
It is possible, but you'll have to fill the gap somehow so the balls don't fall off track
5
DELETED_storm391 in reply to SorunomeDec 24, 2010. 10:21 AM
(removed by author or community request)
37
Sorunome (author) in reply to DELETED_storm391Dec 24, 2010. 2:48 PM
but it should work.... waht didn't work??
5
DELETED_storm391 in reply to SorunomeDec 24, 2010. 2:51 PM
(removed by author or community request)
37
Sorunome (author) in reply to DELETED_storm391Dec 24, 2010. 11:55 PM
in you're pics or in the otherpics??
5
DELETED_storm391 in reply to SorunomeDec 25, 2010. 1:27 PM
(removed by author or community request)
37
Sorunome (author) in reply to DELETED_storm391Dec 25, 2010. 1:51 PM
I see, in the third pic are these green connectores, but that can't work coz there also has to go something ontop
And you'll have to make a lerdger frame!! :D
5
DELETED_storm391 in reply to SorunomeDec 25, 2010. 1:55 PM
(removed by author or community request)
37
Sorunome (author) in reply to DELETED_storm391Dec 26, 2010. 12:38 AM
cool!!
11
k-n-e-x(leaved ibls) says: Dec 3, 2010. 6:23 AM
5*!
37
Sorunome (author) in reply to k-n-e-x(leaved ibls)Dec 3, 2010. 9:59 AM
Thanks!
11
k-n-e-x(leaved ibls) in reply to SorunomeDec 5, 2010. 5:47 AM
i'm using this in project 3
37
Sorunome (author) in reply to k-n-e-x(leaved ibls)Dec 5, 2010. 9:21 AM
Cool!
legoman6986 says: Oct 19, 2010. 3:12 PM
do you have to have the y-clips?
37
Sorunome (author) in reply to legoman6986Oct 20, 2010. 7:08 AM
yes, you have to.
75
Hiyadudez says: Oct 3, 2010. 7:24 AM
Wheel*
37
Sorunome (author) in reply to HiyadudezOct 3, 2010. 7:41 AM
Oh... :(
16
~KGB~ says: Oct 1, 2010. 9:52 AM
love it 5*!
1-40 of 44Next »
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!