Knex AI AE Sniper Rifle

 by snipercrazed
Picture 011.jpg
this is my first knex gun.
it shoots around 10-20 meters.

if you have any questions just ask.

ive also made a magazine so it can shoot green rods.
 
Remove these adsRemove these ads by Signing Up
erikos kostarikos says: Jan 22, 2010. 7:29 AM
Faved, fived and subbed XD
knexsniper123 says: Jan 10, 2010. 1:50 PM
does it have to be broken pplease respond plase
erikos kostarikos in reply to knexsniper123Jan 22, 2010. 6:49 AM
I think so because if it wouldn't be needen then it wouldn't be in the instructable right?
Maybe you should give it a try without broken ands else just break it you know?=P
cool bas3 says: Oct 17, 2009. 2:33 AM
how is the y connector cutted??
snipercrazed (author) in reply to cool bas3Oct 20, 2009. 9:38 PM
just snap one side off or cut it off
funguy29467 says: Jan 5, 2009. 4:22 PM
Y HAVENT I BUILT THIS YET?!?!?!?!?!?!?!?!??!?!?!?!??!?! I MUST DO SO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
funguy29467 in reply to funguy29467Jan 5, 2009. 4:26 PM
wait ... hinges, ball joints , and block trigger?! noooo!
snipercrazed (author) in reply to funguy29467Jul 29, 2009. 1:31 AM
HAVE YOU SEEN MY NEW SNIPER
snipercrazed (author) in reply to funguy29467Feb 3, 2009. 12:04 AM
it has a true trigger
Raiden97 says: Jul 9, 2009. 9:10 PM
GO TO http://knexinstructions.weebly.com/ its really cool! (you should also sign up there)
snipercrazed (author) says: Jul 3, 2009. 7:21 PM
Raiden97 says: Mar 17, 2009. 6:38 PM
can someone tell me a piece list
DELETED_DELETED_DarthVader in reply to Raiden97Jun 25, 2009. 1:13 PM
(removed by author or community request)
Raiden97 in reply to DELETED_DELETED_DarthVaderJun 28, 2009. 7:40 PM
hmm...sounds like youre joking
Shaznazabbadaz says: Oct 25, 2008. 4:11 PM
part count
DELETED_DELETED_DarthVader in reply to ShaznazabbadazApr 19, 2009. 5:06 PM
(removed by author or community request)
Shaznazabbadaz in reply to DELETED_DELETED_DarthVaderJun 25, 2009. 9:31 AM
yep i built it, its very good
yerjoking in reply to DELETED_DELETED_DarthVaderApr 26, 2009. 3:19 AM
Pwned.
bestknex says: Jun 18, 2009. 10:12 AM
why you do not make pictures of the sides from the gun
d4rkde4ths says: Mar 29, 2009. 6:13 PM
how do you shoot this thing I'm trying to find out how and also use the mag plz add instructions
DELETED_DELETED_DarthVader in reply to d4rkde4thsApr 19, 2009. 5:03 PM
(removed by author or community request)
yerjoking in reply to DELETED_DELETED_DarthVaderApr 26, 2009. 3:19 AM
Pwned.
Raiden97 in reply to yerjokingMay 9, 2009. 9:58 AM
first time ive seen 3 pwns on one page lol
yerjoking in reply to Raiden97May 9, 2009. 10:10 AM
There are 4.
Raiden97 in reply to yerjokingMay 10, 2009. 9:51 AM
oh yeah
d4rkde4ths in reply to d4rkde4thsMar 29, 2009. 6:19 PM
or video
yamiyobi says: Feb 18, 2009. 2:30 AM
ive made one and he shoots not good the magazine doesn't work and what is that stange thing on the barrel
DELETED_DELETED_DarthVader in reply to yamiyobiApr 19, 2009. 4:59 PM
(removed by author or community request)
yamiyobi in reply to DELETED_DELETED_DarthVaderApr 30, 2009. 9:56 AM
of course i know what a bipod is!! i mean a other thing.
yerjoking in reply to DELETED_DELETED_DarthVaderApr 26, 2009. 3:20 AM
Pwned.
gremlinz_man says: Mar 14, 2009. 9:02 AM
can u post something on how to make the mag plz =P
DELETED_DELETED_DarthVader in reply to gremlinz_manApr 19, 2009. 5:00 PM
(removed by author or community request)
yerjoking in reply to DELETED_DELETED_DarthVaderApr 26, 2009. 3:19 AM
Pwned.
Raiden97 in reply to gremlinz_manMar 17, 2009. 7:04 PM
step 1 shows you how to make the mag
jibareawesome says: Apr 19, 2009. 11:53 AM
I cannot get this gun to fire properly. I have tried with blue rods ad thick rubberbands to push the firing pin. I have also checked to see if i built it right and i did. Please help.
poptart432 says: Apr 13, 2009. 4:22 PM
i cant make th bipod the pics not clear
knex mad says: Dec 31, 2008. 12:31 AM
HOW MANY YELLOW CONECTERS DOES IT NEED TO MAKE ALL OF IT
snipercrazed (author) in reply to knex madFeb 3, 2009. 12:03 AM
about 80
knexnooby says: Dec 21, 2008. 2:33 AM
awesome gun !!!!! I'm gown make it you've good instructions make a video so I can see how it shoots
Oblivitus says: Oct 24, 2008. 2:22 PM
What size ammo does it fire? How did you test and measure the firiong distance? Have you done any damage tests? How does it fire?, slingshot?, firing rod?, or something else? I would like to see a video showing exactly what it does and its full potential also, because KILLERKs SRv1 was terrible when I built it, there are guns that are big on claims but not on results, so I would like to see this gun perform before I go out on a limb and build it.
snipercrazed (author) in reply to OblivitusNov 1, 2008. 10:21 PM
ive also made a magazine so it shoots green rods
snipercrazed (author) in reply to OblivitusOct 24, 2008. 5:30 PM
it shoots blue rods, i tested it in my backyard, no not at this point, theres a firing pin hits the bullets, no, yes.
Oblivitus in reply to snipercrazedOct 24, 2008. 5:37 PM
Well, then I don't see how it could be getting over 100 feet.
snipercrazed (author) in reply to OblivitusOct 24, 2008. 5:51 PM
why not
sniper crazy in reply to snipercrazedOct 29, 2008. 9:19 PM
yea all this gun needs is a medical rubber band and it would be as power full as gorkems rifle that is if the firing pin can take the tention
popomaster in reply to snipercrazedOct 24, 2008. 5:57 PM
100 feet is like, running at full speed for about 15 seconds. do that and thats how far it has to shoot to reach 100ft. or if your 5-51/2 feet tall, thats about 20 of you lying down. and what do you mean why not. you can't just say it goes ___ far and expect it to be true.
Oblivitus in reply to popomasterOct 25, 2008. 5:22 AM
He changed it to 30-60 feet, lol. Thanks for the honesty though, snipercrazed.
jollex in reply to OblivitusOct 26, 2008. 9:49 AM
OMG I MADE A NU 9 PEACE GUN AND IT SHUUTS 845 FEET, LOL LOL!!!!!!!!!!111ONE1111!!!!11!!!!!one
Oblivitus in reply to jollexOct 26, 2008. 9:55 AM
Okay... calm down.. now please DO TELL. What exactly is it and how can i make one?
jollex in reply to OblivitusOct 26, 2008. 10:11 AM
I was just imitating some of the instructables knexers that exaggerate a lot.
Oblivitus in reply to jollexOct 26, 2008. 10:22 AM
Grrrrrrrrrr, you got my hopes up!
The Creatornator in reply to OblivitusAug 9, 2009. 11:12 AM
Actually, I have a few ideas, well only one right now, but it requires two to use it.
hellpilot says: Oct 30, 2008. 12:05 PM
I mean it looks really good...but its cause it looks bendy...im working on a sniper too.
snipercrazed (author) in reply to hellpilotOct 30, 2008. 11:09 PM
sweet, what kind of sniper
hellpilot says: Oct 26, 2008. 1:14 PM
Looks like a fail...but I said it looks...
snipercrazed (author) in reply to hellpilotOct 27, 2008. 12:32 AM
ill get one soon
sniper crazy in reply to snipercrazedOct 29, 2008. 9:17 PM
HAHA I NEVER THOUGHT ID SEE A SNIPER FAN BESIDES ME ON THIS SITE SNIPER CRAZED;D
snipercrazed (author) in reply to sniper crazyOct 29, 2008. 9:19 PM
XD
seansippo says: Oct 28, 2008. 4:11 PM
this looks AWSOME. i am mostly intersted in good looking items not so much on a functional ones
Dutchj says: Oct 24, 2008. 2:09 PM
How many rubber bands did you have on this thing to get that distance? Nice gun, does the bolt do anything though? You should put up a picture of the side of the gun, for a good overview.
snipercrazed (author) in reply to DutchjOct 24, 2008. 5:27 PM
i use a small red one and some other small ones that ive joined together the bold pushes the ammo back holding it still
pls says: Oct 24, 2008. 5:13 PM
dat looks perty sexy
StyleCore says: Oct 24, 2008. 3:47 PM
Just to point out this is a whole lot of different guns in one. Ironmans L96 Mepains sniper And another bipod from someone
Storm950 says: Oct 24, 2008. 12:03 PM
WOW, this rocks! 5*! :)
I_am_Canadian says: Oct 24, 2008. 11:11 AM
Hot DOG! What a gun! Very nice. A video would be awesome. 5 Stars!
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!