Knex Ball Machine Lift

Step 3: Base #2

This is the second part of the main bit. It is a tadbit harder, because you have to put the motor in this side. I know you can do it. Good luck!

1: The part you are about to make
2: Start with this bit
3: Make these two pieces. MAke sure you are making the right 3d connections on the connectors
4: Put them together. Easy
5: This is the housing for the motor. The make it from the following 6 pictures
6: ---
7: ---
8: ---
9: ---
10: ---
11: ---
12: ---
13: Put the apparatus you just made into the frame
14: Finished base #2. Yay!

Comments

[Noodlegamer]

(removed by author or community request)

[I_am_Canadian]

Nuts! Sorry!