Instructables
this is the first 2 part slide gun i have seen on the site. it has a removeable mag (alot better than my auther removeable mag gun) slide and mag release. this is one of the coolest pisol's I have made I think its a little better than the P2000 (more range and power)

Pro's
-very innovative
-good range for a pistol(about 35 feet)
-good power for a pistol
-comfortable
-Loads of FUN!!

con's
-only holdes 5 shot's
-you CAN NOT put so many rubber bands on the ram
-uses a minimum of 3 cut part's:( (max but not needed 5 cut parts) they are all cut off end's of white rod's

hope you enjoy the gun don't forget to rate!:)

 
Remove these adsRemove these ads by Signing Up

Step 1: Handle

Step 2: Handle part 2

Step 3: Handle part 3

Step 6: Back half part 1

Step 8:

1-40 of 116Next »
~Meme~2 years ago
Horrible gun, it only shoots when it misfires.
Agony2 years ago
wtf
what did you use to cut the white rod?
i used a long orange rod and i cut it with some sort of pliers
Thanks for replying but just 2.5 minutes after that comment was posted, I found out I didn't have enough pieces for it.
this looks like dutchwarlords...
dutchwarlords is this
the mag is weird how it loads the ammo. tbh i destroyed it 10 minutes after i was done
great gun but the mag is kinda still workin on getting it to work right
Great gun i shot my sister in the head and she
Cried!
why would you shoot your sister in the head?
that's pointless and how would you like it if someone shot you in the head with this gun?
because i did
YOU CRUEL
XD if only i was there
:(
stop talking aboutt things you cruel xc
oh, if she's older than you then it's alright then
and shes older ven me
need more pics on step 4
THESE INSTRUCTIONS ARE FU***** SH**
THE FIRST 6 PICTURES ARE THE FINISHED PRODUCT, PICTURES 7-12 ARE HOW YOU BUILD IT......PITCTURE 13 IS THE FINISHED PRODUCT
if 7-12 are how to build the finished product and 1-6 are the actual finished product, why do they look different if you build them?
So we build 1-5 and then 6-12 is a different part we build? Epic confusion....
Dr.Squirrel4 years ago
Reliable? Just asking
this is most definatly a desert eagle just look at how beautiful you did that slide
mrmplaster4 years ago
i dont have any snapped rods since i brought my knex i dident snap any but i have loads of snapped connecters lol so i cont build the gun that sucks i dont wanna waste knex wat am i gonna do when i find a sick gun and i destroy this and my rods are going to waste
SteelBeast4 years ago
Finnally, The real original gun. and wow much more detailed steps then Dutch Warlord's version. I am gonna build this tommorow YAY And about the broken pieces I once bend a Grey Rod (Longest rod eva) by accedent. So I cut the it to pieces and now I got 7 pieces of the same length you used. So I can build this fully prepared for everything this tutorial trows at me. I give you a rating after I am done testing it.
Ah, To much clip Tan Used you used 17, I only got 11, They are rare in my country....
Does there really need to be 8 Clip Tan's in the front half?
FrozenStar5 years ago
I would build this but cut parts are evil
cut parts are not the spawn of satan they are satan and i only use pieces that are already broken or rods that snapped in other guns for things like this
FINALLY! someone that agrees with me! Cut parts are super lame!
Cut parts are Satans Doing.... Btw.... this is buildable with out cuts... I managed
amazing! you are amazing!
Cut parts are a spawn of Satan himself.
... I used to think that, but once you have them, it's okay!
I mean, the only broken pieces I have are from my guns being too powerful xD
haha, i have quite a bit of cut ones now.
show me how
Cut pieces are the spawn of bealzebub the lord of all hell
dash it you took the bibicalesc words out of mouuth
cut parts are evil
scim4 years ago
Can't wait to build this. shame about the broken pieces!
1-40 of 116Next »