Knex Gun 2

a small hand gun that surprisingly has a powerful shot, i made it after i made the long wwii gun. Hopefully this one will be a better gun than the other go ahead see my instructable.

comment comment comment please tell me what I need to improve, show me your Instructables, ask me questions on to post yours or not, and please suggest new ideas like a new mechanism

i always use the mechansm you see on the side to trigger the firing pin i dont know any other way teach me and plaese comment on my work

Step 1: What you need

i understand i didnt show you all the pieces you need in one step it must've been hardto do not knowing what you need, so im putting ALL of what you need in ONE step

the only pieces you sholud have a hard time with is the light green connectors and the conn, with the ball at end in the last pic the rest is easy to get.

Comments

[mettaurlover]

JSYK, you could get a TON more power out of this if you made the barrel connectors longer, moved the trigger closer to the handle, used a longer firing pin, and hooked two bands together and hooked their ends on the very end of the barrel area.

[musicman444]

shoots hard but is easy to carry 4/5

[The Jamalam]

i think this is good too, except both your guns are missing a vital ingredient - a true trigger! try to put on the one on the "Desert buzzard slide pistol", because that one is simple. I rate this 4 stars because it looks good.

[ZTheMaker]

hey i made a gun that shoots rubber bands check it out

[Oompa-Loompa]

At the very least, put a trigger on it. A simple mag wouldn't hurt either... Besides that, it loox pretty powerful.

[mrbox]

There is a trigger on it... you see the block trigger (orange connector)? Its at the very front of the gun!

[Oompa-Loompa]

pfft

[lord voldamort]

might want to put the trigger up higher on the gun. and try to use gray rods for the barell next time.