Instructables

Step 1: The front

Picture of The front
IMG_1302.JPG
IMG_1303.JPG
IMG_1305.JPG
IMG_1307.JPG
IMG_1308.JPG
For this step you will need :
6 purple connectors
2 yellow connectors
2 blue connectors
2 white rods
6 green rods


Connect a purple connector with a blue one and a yellow one with 2 green rods and a white. Now slide two other purple connectors on. Add a white rod on the edge.

Do this twice, the connect them with 2 green rods.

Step 2: The back

Picture of The back
IMG_1311.JPG
IMG_1312.JPG
IMG_1313.JPG
This part is a little add on that makes it a lot sturdier.

Connect a red connector to a yellow/ gray connector with a green rod, then add a green rod to the red connector and a white one to the yellow one. Do this twice, then connect with a green rod

You should now have both of these.

Step 3: Middle section.

Picture of Middle section.
IMG_1315.JPG
IMG_1316.JPG
IMG_1317.JPG
IMG_1314.JPG
You need 2 blue connectors, 2 purple connectors, 2 yellow connectors, 7 green rods and 2 white rods.

Attach a purple connector to a yellow connector, and add a green and a white rod on like in the pictures. Do this twice, then connect them with a green rod, and add a blue connector on each side, with a green rod sticking out.

Step 4: Ipod touch sideways mod

Picture of Ipod touch sideways mod
IMG_1325.JPG
IMG_1324.JPG
If you have an Ipod touch, and want to put it in sideways, add this onto the end.

Step 5: Put it together!

Picture of Put it together!
IMG_1321.JPG
IMG_1322.JPG
IMG_1323.JPG
IMG_1324.JPG
The most fun step!

Make sure that the front and middle look like this, so that connecting them will be easy. I forgot to show how to make the little piece with the two red connectors, but it's not that hard.


Reposition the back so it can connect, then just clip it on!
 
Remove these adsRemove these ads by Signing Up
TigerNod5 years ago
Not bad, 3 stars.
Bartboy (author)  TigerNod5 years ago
"3 stars? That's a bit low" -Anonymous Thanks, anything more than 2.5 is good!
Well, it's not because I don't have an Ipod, but it's because it looks a bit simple. Maybe I have a tip for improvement; isn't there some sort of extra on an Ipod? I heard of extra speakers or something. Maybe if you put some place to store these.
Bartboy (author)  TigerNod5 years ago
It allows you sync, charge, and play your ipod however you want. Simplicity is a pro.
Bartboy (author) 5 years ago
Funny.... I think this is one of my best....
freakinslop5 years ago
you inspired me to make a hydraulic knex stand for my nintendo ds! It goes up and down (kinda pointless but cool =P) but it broke yesterday...
Bartboy (author)  freakinslop5 years ago
Post one pic, and I'll be amazed! Too bad it broke.
ok I'll try to get it up asap but I got a ton of homework and other stuffz to do so it might be a while.... =P
pls5 years ago
VERY cool, i need to make one..
cool 5 stars I wish I had an Ipod
Bartboy (author)  Knex_Gun_Builder5 years ago
Still 2 views!
Owenmon Bartboy5 years ago
*ahem* your welcome~ pooie on ipods >:)