Picture of Knex M1 Carbine
This is a M1 Carbine and I hope you guys enjoy this

Range: 40 ft or so
Looks: I'd say it looks a lot like the real thing
True Trigger

Well hope you like this...

Credit for Taunts with his mp5 I modified the mag a bit to hold Grey connectors though.
Credit to the Dunkis for his trigger

This is my first instructible so leave alot of good comments please.
Remove these adsRemove these ads by Signing Up

Step 1: The Adjustible Stock

Picture of The Adjustible Stock
The real stock of the M1 Carbine is actually some strong wires but I couldn't do that with knex. Although the stock is kinda weak It is adjustible to the users shoulder.

2-3 are the same thing (Sorry for the Blur)
4 Collect
5 Attach
6 Attach

Your done with the simple stock

Step 2: Handle

Picture of Handle
Sorry guys but I didn't want to take apart this handle so I just took so pictures of the outside although it should still be simple enough.

1 handle
2 top without blue connectors
3 other side
4-5 inside
6 with the blue connectors

Step 3: Parts You Will Use Later

Picture of Parts You Will Use Later
These give the gun some pizzaz but I dont want to take apart the main gun right now so just build the Decals + Addons

1-3 the first part should be pretty self explanatory
4-5 another part
6 Build X2
7-9 the true tigger

Step 4: The Curved Magazine, Handle, and Barrel

Picture of The Curved Magazine, Handle, and Barrel
The real M1 Carbine has a curved magazine but I found one similar to it. Traunts MP5 so I just modified it to hold grey connectors

1-3 Build Sorry but you'll have to modify the mag when we get to the End
4 -6 Add the rods (put the blue spacers there to help the trigger
7-8 Build these
9-10 Modify the Bottom of the mag as seen in these pictures
11- Find These
12- Attach them
13- Find this place
14- Put a blue rod here
15- Attach the handle like this
16- place another blue rod to secure it
17 Place the true trigger here and make sure that is is behind the rod with the spacers
18- Make this part and attach it here
19- Your Done with this part
1-40 of 77Next »
Anti flame16 years ago
This is a bad instructable the pictures arn't clear and I have no idea where you put the pieces at!!!!!
loyamann123 (author)  Anti flame15 years ago
that doesn't mean its a bad instructabe You shouldn't go flaming other people just because you suck at K'nex
burn!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!(little over protective though)....burn!!!!!!
I think that he means the instruction quality sucks. I personally disagree, but just try to let him improve.
beebee9473 years ago
stock sucks
loyamann123 (author)  beebee9473 years ago
Make a new one yourself! I ran out of pieces
rheath24 years ago
knexboy9593 years ago
this is not a M1 Carbine
you suck
loyamann123 (author)  knexboy9593 years ago
LOl, im sorry, this was my first instructable, how about you make one yourself,
oh wait, you dont have anything that you have to show for yourslef, all you do is flame other peoples instructables, go do something else and dont act like you are 6 years old on the internet
are the m1 carbine and m1 garand related?
Wow Loyamann124 u OWNED Knexboy959. And nice instructable
veeguy3 years ago
The M1 carbine has a straight 15 round magazine. ( I can pull one of mine out of the gun safe and take a picture if you like) The M2 sub machine gun (usually incorrectly called the M2 "carbine" ) could use the 15 round straight or a 30 round curved magazine.
And, the m2 can shoot fully automatic :) I know there is a M1A1 carbine (folding, steel stock) but is there also a 'M2A1/2?
iundonei5 years ago
this is just a striped version of trauts mp5 might as well just make the mp5 its way better
Do you really need the ball joint, cant you just put another one of those hinges in ? 
what's the ammo?
loyamann123 (author)  matsermetsuiker5 years ago
grey connecter
rootbeer966 years ago
were do the rubberbands go for the trigger and the firing pin
loyamann123 (author)  rootbeer965 years ago
refer to THe Dunkis's Ak-47
rootbeer966 years ago
the trigger sucks it wont stay on
loyamann123 (author)  rootbeer966 years ago
You place it behind the white rod
I did that but it still wont stay on
loyamann123 (author)  rootbeer965 years ago
I cannot help you without any pictures or any other answer except "it wont stay on", and "it sucks"
Mr. Cowboy6 years ago
Please try for a better mag
loyamann123 (author)  Mr. Cowboy5 years ago
You could mod it... I will make an improvement later
ShooterV0x5 years ago
Does this shoot?
loyamann123 (author)  ShooterV0x5 years ago
I believe yes
ILIKEPIE3335 years ago
You made the folding stock paratrooper version
stopanator5 years ago
mag is shorter alot shorter plus longer barrel needed plus i think ummm a stock!
deathray756 years ago
the gun is mint but just a idea you the real one has a straight and smaller mag ;) but the guns mint
Graeme26A156 years ago
it looks really cool, but my bro is doing homework so I can't use his computer to make it at the moment, but I think ill make it once my bro is done writing his paper. :)
rootbeer966 years ago
never mind
rootbeer966 years ago
were do you put the rubber bands to shoot or does it shoot
rootbeer966 years ago
I did not make it but tomorrow I will try to
ashb19846 years ago
I made the gun but the trigger wont properly work
1-40 of 77Next »