Introduction: Knex Mini-Uzi (Model)
This is just something i quick thought of when i went to my grandma's house. It isn't the greatest thing I've seen, but its kind of fun to play around with.
Pros: -Has a removable clip
-Has a trigger
-You can pull the action thingy after reloading
Cons:-Clip can spin so it may jam
-SOMETIMES the clip falls out
-Trigger moves with trigger guard
Overall, its an OK gun to fool around with, I think.
THIS IS A MODEL, IT DOESN"T SHOOT!
My GT for xbox live is Th3 3xperim3nt
Step 1: The Clip
This is by far the easiest part of the instructable. It is exactly how it looks, make sure to add the green piece to the bottom yellow connector.
Step 2: The Handle
This step is pretty easy. Just make 2 of the front in pic. 1, the make 2 orange connectors and 1 gray connector for each side. Make sure you put a white rod in that white connector. Also make sure to put green rods in the 2 top connectors and 2 in the bottom red connectors.
Step 3: The Trigger
This might actually top the clip in easyness. Just make 2 orange connectors and on the end of the, white rods. Then make an orange connector on one side and 1 gray connector on the other.
Step 4: The Top
This is probably the hardest step because you have to put white rods in the three. Both ends have 3 connectors in them, then each opposite side have 3. The side opposite the trigger has it on the bottom left and vice versa. For the top, there is a red rod that goes through so you have something for the action thing to go on.
Step 5: FINISHED!!!
All there is left is the rubber band. If there are any questions please comment and I will fix 4 U.