Instructables

Knex Auto Loading gun with magazine.

Picture of Knex Auto Loading gun with magazine.
100_0708.JPG
100_0709.JPG
100_0710.JPG
100_0711.JPG
100_0713.JPG
100_0719.JPG
100_0728.JPG
100_0729.JPG
This is my first working knex gun that actually has a mag. the magazine is built for yellow, and i don't think you can build it to fit any other bullet....i ran into some complications along the way because pieces were not cooperating...that is why a few of the steps look funky.
 
Remove these adsRemove these ads by Signing Up

Step 1: The Magazine

1.you will need 4 of these.

2.Take two of those pieces you just made, and connect them together using small green/black rods. you will need two of these.

3.connect the two pieces with two reds connected with a blue rod, use small green rods to connect to pieces.

4.attach a yellow connector to the bottom of each yellow piece, two on each side. connect with green rods

5. you will need two of these (the orange piece should not be broken, i just ran out of pieces)

6. connect the pieces as shown, NOTE*the orange connector should only be attached to one of the white/black rods,then placed into the other blue one. (again, the orange connector should not be broken)

7. you will need 4 of these wierd black connector/rod.connect one at the end of each yellow connector

8. now attach a blue rod to the side of the two black things, but be sure to place a green connector through it first, do this on both sides, but make sure the green connectors are facing as shown.

9. you will need 4 of these wierd black connector/rod.connect one at the end of each yellow connector
now attach a blue rod to the side of the two black things, but be sure to place a green connector through it first, do this on both sides, but make sure the green connectors are facing as shown.

10. now attach a blue rod to the side of the two black things, but be sure to place a green connector through it first, do this on both sides, but make sure the green connectors are facing as shown.
wietzaa1214 years ago
it truly sucks!!
awsome (author)  wietzaa1214 years ago
working on mods 
narnanar1234 years ago
this is a mint gun i built one and it is great
grevious5 years ago
hmm... slightly resembles a p90 a bit.. but not much though.
Hey, whats with your nazi sign display pic?
lol it's not a swatstica, it's the metallica symbol. it's actually 4 M's put together. lol a swatstica...........
Yeah, lol my bad. btw i can't spell so nazi symbol will do for for now.
DJ Radio5 years ago
not semi auto
nnnn...not sem..m..mi aut...t...to...
awsome (author)  Oompa-Loompa5 years ago
what type of gun would it be? I'm new to gun terminology
perhaps auto-loading.
ya this isnt semi auto... change the name so people dont get misled into this....
pls5 years ago
This isn't a semi-auto, sorry, and theres tons of steps.
awsome (author)  pls5 years ago
ok then, what type of gun would it be? i'll make the changes, and yea there are a lot of steps...sry bout that
pls awsome5 years ago
Semi-auto is when all you need to do is pull the trigger back and it shoots
awsome (author)  pls5 years ago
oh...then what would you call this one?
auto-load.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!