Introduction: Knex Walther PPK

Picture of Knex Walther PPK
Walther ppk is the gun that James Bond uses. This gun is not completely original; it is based almost completely off of TheDunkis' "Mini-er TDS"

This is my first instructable, so bare with me.


  • Size: 5.25" x 3.75"
  • Range: ~ 20 ft.
  • Accuracy: Very Consistent
  • Pc. Count: Med. Low
  • Mag Size: 5

Step 1: Handle

Picture of Handle

This is the handle/ chamber.

1. Build these.
2. Add this. (wrong way in pic, face it the other way.)
3. Attach like this.

Step 2: Trigger System

Picture of Trigger System

This is the trigger system.

1. Build these.
2. Attach here.
3. Add this.

Step 3: Barrel

Picture of Barrel

This is the Barrel.

1. Build these.
2. Put together like this.
3. Attach here.
4. Add this.

Step 4: Mechanics

Picture of Mechanics

Mechanics include: Ram, Mag. pusher, & trigger stop.

1. Build this.
2. Add tape and push the spacer up as far as possible.
3. Tape again.
4. Build this.
5. Put this in here.

Step 5: Rubber Bands

Picture of Rubber Bands

This is were to put the rubber bands.

1. Set a red rod on top.
2. Put a rubberband on the trigger.
3. Put a small rubberband here. (front)
4. Put a small rubberband here. (back)
5. Put in the ram and add rubberbands.

Step 6: Loading

Picture of Loading

This is how to load the gun. Make sure the grey connectors are lined up perfectly straight in the chamber. If they aren't adjust the bands on the mag. pusher to fix it.(it may fire two if you don't)

1. Materials.
2. Bullets face this way.
3. Loaded.
4. Cocked.

Step 7: Finished!

Picture of Finished!

You're done! I hope you guys enjoy this gun as much as I have!

Special Thanks To-

+ TheDunkis
+ NickAwesome
+ and of course, me.

P.S.- I am not responsible for anybody who is harmed in any way through misuse of this toy gun.


An Villain (author)2009-07-25


Big Z (author)An Villain2009-07-26


FireFighter112 (author)Big Z2013-03-09

is the broken Y connector really necessary?

knex_mepalm (author)Big Z2009-07-27

It looks good, but its just another one of those guns which are mag fed...anyway 4.5* all your guns tht you make are like so relistic, im using zak's mini pitsol and your glock 38 as my sidearms cause they are so reliable!!!

Big Z (author)knex_mepalm2009-07-27

Thanks, man.

An Villain (author)Big Z2009-07-26

yeah, wordage fail.

2000smartkid (author)2012-10-12

In the handle, can I replace the blue connectors with white connectors? If yes, then great. If no, then I'm going to anyway, because with blue connectors, the ammo will fall out, and you don't need a hole there, so white connectors are the best choice. I'm using whites no matter what.

Why even post then?

SpeedStrikerXLR (author)2010-06-30

thats what she said

that was cold lol

hahah lololol

znorton (author)2011-11-23

This gun was not the best at first, but then i changed it and now it is one of my favorite guns I have ever made!!!!!!!!!!!!!!!!!!!!!!!! :)

Big Z (author)2009-06-27

Please clarify what you "squeezed" that came off, maybe I can help you.

The Nomlack (author)Big Z2010-07-30


sneakyshitnl (author)Big Z2009-08-22

the squeezing sound is caused bye the firing pin thats pushed against the trigger:) I've made this gun to and added some mods. result? a great reliable side arm. Thanks

dumdum24 (author)Big Z2009-06-27

i bet it was the trigger

klootzak (author)2010-07-30

gangster boyzzzzzzz is noop

knexjay (author)2009-09-17

how convenient just broke a Y

SpeedStrikerXLR (author)knexjay2010-06-30


zyoxin (author)2010-03-06

nice instructions i have high hopes for this gun when i build it

SpeedStrikerXLR (author)zyoxin2010-06-06

The gun is very good but mine shoots two bullets at a time :(

poserboy123 (author)2009-08-21

that gun SUCKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

evadr333 (author)poserboy1232009-10-10

 its funny how your name contradicts with the comment "POSERBOY123"

ajaypatel96 (author)2009-09-27

that thing dont work try to fix the firing process

knexpert1 (author)2009-09-09


knexpert1 (author)2009-09-07

have you really calculate the size

Big Z (author)knexpert12009-09-07

Um, yes?

knexpert1 (author)2009-08-31

trauts made this gun 2

HiZpaniK90 (author)2009-08-11

i turned this gun into a desert eagle. all u have to do is make the barrel one connecter longer nd change that green connector at the end to a yellow. also i made the handle easy slide in fake mags, it locks in too. (no pics/vids)

Unseen997 (author)2009-05-23

could the black y connectors be replaced.i have only 2

CuddlesMcT (author)Unseen9972009-07-24

no you need 4 for the magazine and one for the trigger .sucks huh?llol

dumdum24 (author)2009-06-26

you copied the dunkis mini tds the whole thing is the same

Big Z (author)dumdum242009-06-27

While my gun is very similar, it is not, as you said, the exact same. And if you would kindly read the very first paragraph posted in this Instructable, you might just notice that I did in fact give him credit for the original design.

CuddlesMcT (author)Big Z2009-07-22

i managed to make this gun w/ouy breaking any parts. just need to switch and add some pieces and it works just as fine

dumdum24 (author)Big Z2009-06-27


Big Z (author)dumdum242009-06-28


118118 (author)Big Z2009-07-02

that's why dum dum 24 called himself dum dum 24 cos he's dum dum(24) lol

StarkIndustries (author)2009-07-22


kortje (author)2009-07-12

very nice gun man

UZI dude (author)2009-06-14

finally a high def camera

killmasteh (author)2009-06-07

i maid ur gun and maid the handle 1 part bigger and it holds 9 shots!!! :O

Big Z (author)killmasteh2009-06-07


Big Z (author)2009-06-07

Thanks darth

Bartboy (author)2009-05-26

:O You didn't use pictures of a black one!

PBSisBAD (author)2009-05-13

WOW! That's a d*mn good gun! Any mods?

Big Z (author)PBSisBAD2009-05-21

not any that i havent posted, my last update was on Feb. 9, 2009. (the spacers in step two, that keep it from jamming)

mettaurlover (author)2009-05-04

nice gun. i used dental rubberbands for the top part, as they are nearly invisible and don't slip.

Big Z (author)mettaurlover2009-05-21

cool =)

054629 (author)2009-04-20

My model keeps firing more then one grey connector at a time can you help

Big Z (author)0546292009-04-20

Yes, when you load the mag, and put on the rubber band, look in the chamber to see if the bullets are pressed tightly against each other, if they are at different angles, adjust the rubber band to get them to point at the exact same angle. Done correctly, this should fix your problem.

About This Instructable



More by Big Z:H&K USP .40B.Z.A.R.Glock-38
Add instructable to: