Picture of Knex Wii controller with grip!!!
This a easy instructable for people that like to hold the Wiimote sideways for SNES games or others. Don't forget to rate!
Remove these adsRemove these ads by Signing Up

Step 1: Parts you will need

Picture of Parts you will need
These are the parts you will need

Step 2:

Picture of
Make two of these

Step 3:

Picture of
this part will be the bottom half.

Step 4:

Picture of
This will be the top half of the controller.

Step 5:

Picture of
Now connect both halves as shown.

Step 6:

Picture of
This step shows how to make the grip(If you want you can emove this for use as a steering wheel).

Step 7: READ!!

And your Done!! Note that when inserting the wiimote make sure that both ends are being held firmly by pushing in on the wiimote and to push the top end next to the remote.