loading
Hello, this is knex wizard and I want you to see my new knex 8 shot gatling gun. This is my second instructable.It fires 20ft but if you want it to fire farther then put 2 rubberbands on the wheel.

Step 1: Stand

In this step we will be working on the stand.
1.make this
2.make sure that this piece is at the top
3.now make this
4.make sure that there is a white snowflake at the top
5.make these pieces
6.gather these parts
7.connect them together
8.closer view
9.now attach the other part of the stand
10.gather these parts
11.make this with the parts you just gathered
12.attach these
13.make these
14.attach them to the other part you just made
15.make this
16.attach it to this part
17.gather these parts
18.attach them together
19.attach the yellow rods to the purple lock conectors
20.snap the orange connector onto the white rod
21.this is what you should have.

Step 2: Part That Holds Ammo

In this step we will make the part that fires the piece
1.gather these pieces
2.make this
3.add 3 more
4.gather 2 blue washers
5.make this
6.put them on
7.add 11 more
8.make this
9.slide it in
10.take a rubberband
11.put it around the orange connector
12.pull it onto the front
13.different view
14.get two white rods
15.attach them to the piece on each end
16.now make 7 more

Step 3: Wheel

In this step we will connect all the ammo part together
1.gather these pieces
2.connect them
3.put the spacers on then the snowflakes
4.attach the ammo thing.
5.now attach the rest
6.different view
7.gather these parts
8.slide the on the wheel
9.get this motor or you can use any other moter
10.get these parts
11.put the rod through the hole and add the parts

Step 4: Loading

To load the gun you must pull thefiring pin back and put 4 grren rods in each hole then turn the moter on then it will fire.
This project looks awesome but there isn't enough documentation of you actually making it to be a full Instructable. There are two things which you could do. 1) If you happen to have images of you making your project you can create some more steps, add those additional photos into your Instructable and then republish your Instructable. 2) If you don't have any more pictures of you working on your project, that's ok too. That just means that your project is better suited to be submitted as a slideshow. Your images are already in your library, and you can use the same text that you have already written for your Instructable so it should only take a few minutes to create your slideshow and show the world what you made! Thanks for your submission and let me know if you have any questions along the way.
Cool!
waoh i actually have all the parts maybe ill build that next week. Anyway i dont even use my motor :P and 16 shot gatling gun would be cooler
yah i know but im not that good will gatling guns and yes i was shootinf my camera lol
ha ive never made one so it would be cool but im not to sure about all those red peices! ANd the camera didnt like break or anything? lol
gatling guns arent ssally made 4 range and its a strong camera ive dropped it a lot
oh lol
did you shoot the camra in the first video?
try making it 16 shot. ps, thanks for subscribing to me!
If you want me to post a 16 shot just tell me, and did you check out my 5 shot semi automatic rifle?
I did see your semi-auto, it was good. and go ahead, post a 16 shot.
O.K I will post my 16 shot gatling gun.
Nice gatling gun:) good job! Check out mine if you like gatling guns:)

About This Instructable

1,109views

1favorite

License:

Bio: I am a 15 year old boy. I love knex a lot. some of my top 5 favorite guns are... Tr-18 killerk Knexsayer Mepain Sr-V2 ... More »
More by Knexwizard:Zamorak Godsword, Rune Defender Knex 8 shot gatling gun 5 shot semi automatic rifle (easy instructions) 
Add instructable to: