With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This is just a fun little toy I made. It is a cut of saw and a table saw in the same mechanism. The the cut off saw flips back ,and the table saw lowe...
These are the 2 front legs on the saw. Pic 1: build 4 Pic 2: add yellow rods onto 2 of the things you just built. Pic 3: add the other side panel ...
This is what the table saw slides on. Pic 1: build Pic 2: build PIc 3: attatch
This is very easy just do as in pic.
This is the step that you build the saw blade and housing for it. Pic 1: build Pic 2: build Pic 3: add Pic 4: add 5 more black hands Pic 5: add ...
This is a bit difficult. Pic 1: build 4 panels. Pic 2: add white rods on 2 of the panels. Pic 3: add other side.
Pic 1: Build Pic 2: Atattch
This is the hardest step here. Make sure you do EVERYTHING as in the pic's, because if you do one thing wrong it might not work as well. Pic 1-2: bui...
now we are going to put it together!!! Pic 1: add the first main leg. Pic 2: add the second main leg. Pic 3: this pic is so you can see what you j...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »