Introduction: Knife Making-micarta Handle Tutorial
This instructable show how to easily make a micarta handle for your knife
Step 1: Blade
first of all you need to drill hole in your blade for the rod to pass
Step 2: Shape of the Handle
after you need to shape your handle and cut it
Step 3: Hole
after this you drill the same hole as on the blade but in the micarta
Step 4: Glue
when it's done glue everything together with the pin
Step 5: Sanding
when it's dry sand the handle until you like the shape.
Step 6: Polishing
for the last step i use the polishing wheel to make it shinny. The handle is ready for use!!