Instructables
Picture of Knife rescue
SAM_1734.JPG
SAM_1735.JPG

Rescue a old knife and her caps ...

 
Remove these adsRemove these ads by Signing Up

Step 1:

Picture of
SAM_1738.JPG
SAM_1748 (3).JPG

Material:

a old Knife (shure) without cover,cauthchu,pvc electrical tube,magnet from a HS hdd,copper wire(rigid)

Step 2: How to

Picture of How to
SAM_1742.JPG
SAM_1743.JPG
SAM_1745.JPG
SAM_1746.JPG
SAM_1747.JPG

Turn around the handle with the copper wire(spiral mode) and stop it with the Caoutchouc.

It's rigid and sure in all conditions.

In the hot water for the 3 minutes,the Pvc tube is ready to mashed (plate),then join de rubber protection and

two magnet(between)...

Step 3: Ready for use....everywhere...

SAM_1749.AVI(516x387) 15 KB
Gregbot4 months ago

Nice!

alby21europa (author)  Gregbot4 months ago
thank you :)