Print PDF
Favorite
Email
Step 4Thread bands
1. Thread bands through holes.
2. Attach weight to the center of low tensioned band.
3. Use nails to secure bands.
- I recommend a hole larger than the 1/8" holes in the photos. It was hard to thread the rubber bands.
2. Attach weight to the center of low tensioned band.
3. Use nails to secure bands.
- I recommend a hole larger than the 1/8" holes in the photos. It was hard to thread the rubber bands.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
