Instructables

Step 2:

Picture of
02.gif
ONCE YOU HAVE YOUR LASER TAG INSTALLED AND RUNNING, AND YOUR IR CAMERA CONNECTED THROUGH THE USB CARD, CONNECT YOUR PROJECTOR AND RESTART YOUR COMPUTER. 

NOTE. THIS IS FOR WINDOWS XP OR VISTA, NOT FOR MAC USERS. IF YOU HAVE A MAC, YOU CAN INSTALL WINDOWS IN A DIFFERENT PARTITION AND RUN IT FROM THERE.

ONCE THE COMPUTER RESTARTS, SET THE PROJECTOR AS A EXTENDED DESKTOP WITH 1024 X 768 RESOLUTION SCREEN (THIS IS VERY IMPORTANT), ALSO SET YOUR LAPTOP SCREEN RESOLUTION TO 1024 X 768.


 
Remove these adsRemove these ads by Signing Up