With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
These are assembly instructions for the LCD Temperate Shield with buzzer that i am going to be selling soon. Please note, all the photos are my own, b...
Make sure you have all your parts per the bil of materials(BOM) and all the tools, for some recomendats i'll like to some ladyada guides. This also wo...
Place your Board in a vise or something similar to hold it
Place the buzzer in the holes marked "Buzzer" The polarity Does not matter for this part NOTE: on this particular proto run i didn't have the right ...
Place the Contrast Pot in the whole marked 10K Pot(Contrast) Again, the orientation doesn't mater with this part, and just solder and clip the leads ...
Next place the 2 Push Button "Tact-Switchs", the can only fit in easily 2 ways, make sure the leads are on the sides as shown, and the switchs should...
Placing the Header for the LCD, you could also solder the pins from the LCD directly to the board, but for my taste, i don't like to tie the LCD to on...
Placing in the 10K Pull-up Resistor for the alarm On/Off switch
The TMP36 will look like a standard Transistor. You will need to bend the middle pin offset to the other pins in order for it to fit on this board. ...
The headers will come in a big strip and will need cut to size, I recommended placing it in your Arduino Board and the Clipping to the right size/len...
At this point you can trim up any leads you haven't already, you can trip the headers you just solder, NOT THE LONG PART ON THE BOTTOM, only the part ...
The code as a .pde (opens in the Ardunio IDE) are attached below
Here are the 0.3 (beta) version of the files, these are the latest ones i have, i will try and update as i go, and i will upload the production versio...
We have a be nice comment policy. Please be positive and constructive.
We noticed you attached photosto your comment.
Indoor Thermometer with both LCD and "Analog" Readout with NeoPixelsby NextFab
Make Amarino evaluation shield for Android-Arduino-Bluetooth Experimentsby buildcircuit
An Arduino Thermometer with Digital Displayby akellyirl
Data Logger Projectby W1LL7
4-in-1 Arduino LCD Shield Version 2by braulio777
Arduino controlled automated blinds with Web UIby FreedomToCreate
Datura 6 home automation - 2015 improvementsby prnet
Datura 6 relays automationby prnet
Arduino LCD Thermometer / temperature control with TMP36GZ Temp sensor added 2 chanel r…by citin
Solar collector & Radiant heat controllerby CBiblis
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
By clicking "Create Account" you are indicating that you have read and agree to the Terms of service.
Already a member? Login »
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.