Print PDF
Favorite
Email
Step 4Mounting to ceiling
In my case I am mounting to a steal beam that runs the length of my room. You may have a different set-up.
Steal beam:
1. Place other half of speaker mount in the desired location on ceiling and mark where the holes will go with a pen.
2. Drill holes in beam with bit that is same size at the rivets (1/4" and 1/4" in my case)
3. Hold speaker mount up to holes and use pop riveter to mount to beam.
Regular roof with wood beams:
1. Place other half of speaker mount in the desired location on ceiling and mark where the holes will go with a pen.
2. Using long wood screws (1.5"-2") mount to wood beam.
Steal beam:
1. Place other half of speaker mount in the desired location on ceiling and mark where the holes will go with a pen.
2. Drill holes in beam with bit that is same size at the rivets (1/4" and 1/4" in my case)
3. Hold speaker mount up to holes and use pop riveter to mount to beam.
Regular roof with wood beams:
1. Place other half of speaker mount in the desired location on ceiling and mark where the holes will go with a pen.
2. Using long wood screws (1.5"-2") mount to wood beam.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
