Step 28PC Software
You control all functions of the scope from this software: Channel level scaling and offset, timebase, trigger, averaging, etc. I made an effort to keep the layout simple and user friendly, and at the same time fast to operate. You be the judge if I succeeded - different people have different preferences of course. Good suggestions for improvements are always welcome.
You can make measurements on the traces using the cursors (here: amplitude and frequency - see green cursors in the display and status bar at the bottom).
The screen refresh rate is quite acceptable, I get about 7 frames/sec with a single channel turned on, and 4.5 frames/sec with both channels turned on (record length 250 points in both cases). There is a new version of the Picaxe microcontroller announced to be released some time in the future (but not sure when exactly) which will roughly double those numbers - then the display will become really fluent.
| « Previous Step | Download PDFView All Steps | Next Step » |
![]() |
Add Comment
|





























































