Print PDF
Favorite
Email
Step 10Glue LEDs in and Waterproof
Using hot glue, glue all the LEDs in from the top. Apply glue at the base of the LEDs to insulate them.
NOTE: After about a month of using it and after posting this instructable, I opened up my aquarium hood to find many of the LED and Resistor wires rusting away. I did not want this to continue, so I coated all exposed wires with hot melt glue. It took about 15 min to coat everything.
NOTE: After about a month of using it and after posting this instructable, I opened up my aquarium hood to find many of the LED and Resistor wires rusting away. I did not want this to continue, so I coated all exposed wires with hot melt glue. It took about 15 min to coat everything.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
