Step 5: Onto a Perf Board!

After having had the project on two breadboards I decided I would attempt at putting all of it onto a perf board. After many failed attempts, I finally got it all together. Next, I'm going to try and put it all in an altoids tin, or two, so it can be more portable. After getting everything working and soldered together, I hot glued it all to keep it in place and to keep from having any unwanted wires connecting.
<p>sh&eacute;ma ?</p>

About This Instructable




Bio: My name is Logan Carlson, I am a freshman in college at Florida Polytechnic University. I try to build all the time and post my ... More »
More by LCLogan5:Edge Lit Arc Reactor Water Gun Alarm Clock Electric Eraser 
Add instructable to: