Introduction: LED Bank Lamp

Picture of LED Bank Lamp

DIY - LED Bank lamp

Step 1: Things That You Need

Picture of Things That You Need

Additionally you need some cardboard.

Step 2: Cut the Bottom and the Top of the Bottle

Picture of Cut the Bottom and the Top of the Bottle

Step 3: Sold It

Picture of Sold It

Step 4: Build It

Picture of Build It

1 Cut a round out cardboard
2 Cut a hole into it
3 Put the alu wire into it
4 Put the top of the bottle on the wire

Step 5: Finished

Picture of Finished

Comments

amandaghassaei (author)2012-11-05

so are the blue and green leds soldered in parallel in your circuit? sometimes this is not a good idea bc the difference in the voltage drop across two different colored leds can be different and cause one of the LEDs to be very dim.

Adamman (author)amandaghassaei2012-11-09

And it didn't work with serial circuit.

Adamman (author)amandaghassaei2012-11-07

The voltage was okay for both, I ordered the same serial of each color, it seem like it works

About This Instructable

1,629views

1favorite

License:

More by Adamman:Diy gingerbread houseMinecraft Steve head cardboardLED Bank lamp
Add instructable to: