Print PDF
Favorite
Email
Step 2Solder the lights in
I am using a 8 AA Battery holder, so thats 12v.
So I soldered 3 white Leds in series to drop the voltage to each led to 4v and be plenty bright.
Make 6 rows of these.
I started on the right side of the breadboard so I could use the left to mount to the reflector bracket.
So I soldered 3 white Leds in series to drop the voltage to each led to 4v and be plenty bright.
Make 6 rows of these.
I started on the right side of the breadboard so I could use the left to mount to the reflector bracket.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Apr 19, 2007. 1:06 PMcarlitrox
says:
Hi, don't need a resistor in the circuit?
Reply
 |
Add Comment
|
