Print PDF
Favorite
Email
Step 5Inserting the LED and battery.
Now you'll need to get the LED and battery to behave and sit where you want them to.
This does not work very well the majority of the time. Once you have them lying flat, you'll need to sew on the bottom pastie. I left a little pocket so that the LED and battery were easily accessed. The pocket is somewhat of a challenge - you'll need to make it wide enough for the battery to slide out, but tight enough so that you get a good connection between the LED and the battery.
This took a few tries.
This does not work very well the majority of the time. Once you have them lying flat, you'll need to sew on the bottom pastie. I left a little pocket so that the LED and battery were easily accessed. The pocket is somewhat of a challenge - you'll need to make it wide enough for the battery to slide out, but tight enough so that you get a good connection between the LED and the battery.
This took a few tries.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
